Chapter 4. DRAWINGS PRODUCTS semi-fitted SILHOUETTE 

For build patterns products semi-fitted silhouette, you can use basics 1 and 2. Products semi-fitted silhouette in its form close to products adjacent silhouette. Semilying silhouette follows the contours shape without stressing it due to the small difference between the girths chest, waist and hips. 
Section II describes the construction of patterns cap products semi-fitted silhouette drawing using the fundamentals 1.
The pattern of these products may seem quite simple, as build used measure in proportion to the folded shape. 
Pattern one-piece dress semi-fitted silhouette for shapes same size, but different widths. to build more complex. This is because some parts of the figure measurements is not exposed, and therefore, they have not been reflected in the framework. Inaccuracies make it difficult build fitting shift dresses on the figure: the transfer lines in accordance with the characteristics of the shape, the balance of the product.
In section II the proposed method of construction of the pattern shift dresses semi-fitted silhouette for female figures of the 1st and 4th of widths. size 48. 
The principle of construction of such patterns can be used for dresses with sleeves of a different design, such as reglan.
Section III describes the modeling of shelves and backs products semi-fitted silhouette, potrebnih at the waist, with Princess seams spaced from the line of the armhole and shoulder sections. In the absence ofraised seams shelves and back Darts at waist line make shallow and long, placing them closer to the side seams.
To obtain a small fit of the front bodice in the waist area sometimes move the Darts on the waist line tilted in the side sections. In the Supplement includes pictures of products, modeling of which is formed with ausing these techniques, as well as techniques transition from adjacent and direct silhouettes to poluprilegayuschy.
If the build is done the use patterns of the product adjacent silhouette, then change the degree of fit in the waist. Fit products on the basis of patterns straight silhouette is achieved thanks to the pave Princess seams, making tucks, cutting out parts (shelves, back, before, the cloth of the skirt) at the oblique direction of the thread. 
In the Appendix Fig. 45 - 60 recommended for products semi-fitted silhouette different product groups.