The method is flexible (vest-mock) intended for the manufacture of men's outerwear without fittings according to individual orders of the population.
The method is based on using pre-made carrying vests, which greatly reduces customer service time when taking measurements. In this method, you must carefully examine the features of the physique of the customer, to create a cut in a specific shape, and then make a split for a number of design lines, special layouts products, fashionable silhouette shape. The process of work with the layout of the figure should be seen as a fitting (fitting) of the conditional products to the customer to verify sizes and shapes of parts of the structure.Thus, the conditions for excluding fittings in the manufacturing process of the product.
The models represent conditional products (jacket, coat) sleeveless (or with a separate exhaust hoses are not connected with the main part of the layout), cut to waste of design documentation and respectively made of a fabric suiting or overcoat of the group subject to testing, designed design.
The shelf and the back of the layout consist of two parts (upper, or abutment, i.e., yoke, and bottom) between which there is a gap of 2 cm Transverse edge of the back yoke situated on the line of convexity of the blades and the transverse edge of the yoke, each of the shelves - on the chest. The top and bottom of the layout are connected graded samosogrevaetsya braid. The possibility of making the gap between the upper and lower parts of the layout provides for the regulation of the balance at each specific figure.In addition, to clarify the width of the scarf on the chest, waist and hips and the width of the neck, the lower section of the side seams and upper portion of the middle seam of the back left Nesmachnyi; on the lower section of the middle seam of the back handle slot, and the line of prosanos samosogrevaetsya sew the zipper.
A prerequisite is the manufacture of models according to the templates used later in nemelka and cutting the products into individual pieces. For ease of use layouts they are applied to the auxiliary lines (contrast colour stitching): the horizontal line of the waist and hips, and the vertical - side portions of the shelves and cutting barrels. Using these lines to find the correct position of the parts layout in the figure.
The models are designated by a product dimensions: product width at the chest, waist and hips, length shoulder seam, sleeve width, as well as lines to apply multiple variations of line hem and sleeves, the relevant figures related growth.
 

Fig. 116. Maroony vest

Have maroonage vest M. L. Voronin and V. W. Nesmeyana (Fig. 116) the shelf and the back is made vertical split on the main constructive lines, and in places cut is additionally mounted measuring tape with the fasteners located on the main horizontal structural lines.In addition, the measuring tape is fixed on the transverse edges of the yoke shelves at the locations of vertical construction lines, mostly in line prosanos, the convexity of the chest and the line of openings, and the transverse edges of the yoke backless a - on a vertical line the convexity of the blades, the midline of the back and through the openings.
Use maroonage vest allows you to improve customer service, reduce time of manufacturing products, to increase productivity, reduce material and financial costs by reducing the consumption of auxiliary and main fabrics, applied materials, and also to dramatically improve the quality of products due to the accurate and correct cut.