In most adults, the height of the shoulders uneven. This is particularly evident when the figure is measured for the manufacture of shoulder products. A person working with the right hand, the right shoulder is often below the left and Vice versa - the left-hander, left shoulder lower than the right. Raznolikosti (Fig. 96) can be detected while measuring the EAP.to both the left and right sides. It can be determined by measuring the height of the barrel of the WB on the left and right side of the figure. With a slight deviation in the height of the shoulders is limited by the increasing thickness of Podlachia.
When determining the height of the barrel WB lower the height of the barrel corresponds to the position of the low shoulder, and Vice versa - a big tall barrel - the greater the height of the shoulder.
As shown by the dotted line in the drawing, one-shoulder (conventionally the right) of the backrest has a larger bevel, so the point P2 will shift to the position of point A21, G11 point - in the position of the point G'11, a point P3 in the position of the point P'3. The dotted line shows a displacement of the openings the right half back. The right shoulder of the shelves has a larger bevel, therefore, the point P5 moves to the position of the point P'5, the point G4 is in the position of the point G'4, the point P6 in the position of the point P'6, the point G5 is in the position of the point G'5.
LABORATORY AND PRACTICAL WORK 18
Choose 2 - 3 figures with deviations from the standard. To determine the nature of deviations and to construct Assembly drawings. To make models and try them on the figure. To analyze the results.
SELF-ASSESSMENT
1. What is posture and how is it determined?
2. What is the difference hunched figure from the model?
3. What is the difference pereghibati figure from the model?
4. What features of construction of the jacket and hunched pereghibati figure?
5. What features of construction of the sleeves, stooped and perigenital figure?
6. What are the changes made to the design of the shoulder pieces to figure with the uneven shoulders?
|