In the design of such jacket forming parts of damp-heat methodcomplicated, so their construction is necessary to make some changes.The total allowance at the chest line of PG increase to 8 - 9 cm and distribute on sites, see: the width of the openings is 4.5; width of backrest - 0.6 balance (0,6 x 3.5 = 2,1); the width of the shelf - 0.4 residue (0,4 x 3.5 = 1,4). Line the middle seam of the back, the side sections of the backrest and shelves, front and side Ptacek right.
The deflection of the middle line of the back ТТ1 (see Fig. 5) reduce up to 2 cm; side cut back into the chest move to the left (Г11Г5 = 0). Angle suteki partially transferred from the Board shelves in the front tuck. To build an internal slice shelves (Fig. 23) on the chest to the left of the point G4 lay 35 cm (point Г41). From the resulting point hold-down and vertical at its intersection with line pocket put a point K5, with a bottom line point Н31.
The front tuck on the line side pockets identify points K11 and K12.From the point K5 to the right of the line pocket lay the cut К5К51 equalthe solution front tuck on the line of the pocket К11К12. From point K51 spend vertical to the hem (point N32). Cut Н32Н33 = К51К61. Point К61lies at the intersection of the vertical line К51Н32 К6К11. To buildinternal cut the barrel from a point Г41 on the chest to the left lay cut Г41Г42 = К5К51. Point Г42 and K5 connecting line, and line Г42К5 parallel auxiliary lines Г41К51. The deflection of the barrel on the linewaist Т3Т31 = 1 cm.
|