Defect |
The reason |
Solution |
1. Folds and bottom of the pants shifted outwards |
Misalignment nasechek when stepping flatlock seams |
Combine the stepper seams nadechka |
2. Folds and bottom of the pants shifted outwards along the lines of the stepper seams formed creases |
The pants are cut without regard to O-shaped legs |
Reduce the length by stepping the seams of the front and rear halves by wet-heat processing |
3. Folds and bottom of the pants fit inside, side seams are formed creases |
The pants are cut without regard to X-shaped legs |
Reduce the length on the side seams of the front and rear halves by wet-heat processing |
4. Pants uncomfortable to wear, bends down in front, turned inwards, and at the rear outside |
The pants are cut without regard to variations in the position of the feet: the heels are touching, and socks too disagree |
Lowered the front half of the pants down the inseam; back rise up at the inseam |
5. Pants uncomfortable to wear, bends at the bottom front turned outward and back inward |
The pants are cut without regard to variations in the position of the feet: socks turned inwards and the heels outwards |
Raise the front half of the pants up inseam; rear lowered down inseam |
6. Transverse folds on the front halves of the pants below the waist in the front |
Tapered front halves of trousers at the level of the hips; tapered lining of the trousers at the level of the hip line |
Extend the front halves at the level of the hip line; releasing the lining at the level of the hip line |
7. Transverse folds on the front halves of trousers at the level of the clips fly |
Excessive slope of the line bow at the side seam |
Straighten the line of the bow, extend the pants at the level of the hip line |
8. Pants uncomfortable to wear, crease in the region of the desired length of the folds in the back |
Narrower step width of the rear halves of the pants |
Expand the width of the step rear halves of the pants |
9. Creases at knee level in the back |
Insufficient wet-heat treatment of the rear halves of the pants in the knee area |
Sativum pants in the knee area in the back |
10. Transverse crease below the waistband in the back |
Excessive line length of the seat |
Reduce the length of the seat |
11. Pleats coming from the line of the step down on the front halves of trousers |
Balance pants on the line of the step. The notch is not aligned |
Lowered the front half of the pants line step down, combining the notch |
12. Slack at the level of the desired length of the folds, lifting the belt up behind the slack disappears |
When cutting does not include spammenot (pereghibati) of the pelvis |
Shorten the line of the seat top rear |
13. Tense line of the seat back, the belt is drawn down the line of the seat |
When cutting is not considered excessive tilting of the pelvis forward |
Extend the line of the seat, shorten the bow in the upper part of the front |