You will need: 

- concealed zipper for closure, fleece and chiffon.

Parts cut:

- Two front detail of top (left and right).

- One detail of the back of the product (with the bend).

- 2 oblique bakey, which will be processed at the arm openings.

- Flounce cut on the bias (length 115 cm, width 3 cm).

Allowances: 

- 1,5 cm slices and seams,

4 cm for the hem of the bottom.

Job description:

An average slice right part of the front and the seam of the neck fasten with fabric. Sew good tuck. On the chest the depth of the Darts smoothen the iron down and deep vertical tucks to line the middle of the back. Stitch shoulder seams. Ratatouille allowances. The outer edge of the flounce treat zigzag stitching (thick and narrow). The wrong side of the flounce put on the front side of the front (right side) from the line of the lower edge of the top, along the line of the front middle seam and the neck to the lower edge of the neck left part of front. Sew, performing at the same time the front middle seam.Allowances of the middle front zautyuzhte seam to the left. Run the right side seam.Zipper vacate along side slices (left). The line start at the lower edge of the product (lightning will be released from the bottom up). The excess ends of the braid at the top of the zipper cut. The lower ends of the tape hidden zippers tuck and pristrochite to the seam. The neck finish with a facing. Slices armholes treat oblique welts. Allowance left on ACC bottom of the product, Unscrew the inside out, and then tuck and Topstitch, stepping back from the edge a couple of inches.