In order to independently cut out and sew together the top vest with ruffles will need to buy the following: 2 pieces of fabric (lining and embroidered), interlining, buttons (10 pieces) and the cord (3 mm thick). 


Cut product Top vest with ruffles sewn from cut following parts (see figure):

1. 2 parts top shelf;

2. 4 details the middle of the shelves;

3. 4 details the bottom of the shelves;

4. 2 details ruffles bottom edge of the shelf;

5. 1 detail of the upper part of the backrest (fold);

6. 2 details the middle part of the backrest (fold); 

7. 2 details the bottom part of the backrest (fold);

8. 1 detail of the ruffles of the lower edge of the backrest (fold);

9. 2 details of piping of the neck proper and the Board;

10. 1 detail of the piping of the neck of the backrest (fold). 


Items 1, 4, 5, 8, 9 and 10 need to carve out of the main fabric, and the parts 2, 3, 6 and 7 of the lining. In addition, you will need to do 1 detail ruffles neck (width 8.5 cm) and 2 parts piping armholes (width 4 cm).


Work order

In the first place should be strengthened with interlining cut arm openings and neckline. Next, on the top of the back worn down tuck. To cut the upper parts of the shelves and laid zamatyvaetsya 2 small creases. Run the shoulder seams. As for the sections of the arm openings, then they should be treated with obrazkami. When performing the side seams at the same time you need to grind off the ends of obcutek arm openings. All the details that were cut from lining fabric, you need to tack to the relevant parts of the embroidered fabric from the inside. The upper part of the backrest and shelves pritachivajut to the middle parts and the last one to the bottom.You can then proceed to execute the side seams of the product. Short and outside sections ruffles neckline and lower ruffles are processed dense zigzag stitch (narrow). Ruffles probivaetsya and pritachivajut to cut the neck and lower cut top. The cord is cut into ten equal parts. The obtained segments are superimposed in the form of loops at the same distance from each other on the reverse side on the edge of the right-side shelves and primatyvajutsja. Piping of the neck of the shelves and sides, and the facing of the neck worn down back for short sections.Item received and the product itself is folded right sides and pritachivajut to the slices of the neck and sides. The neckline and sides attracivte in the region. Sewn buttons.Note: the allowances for cuts and stitches, 5 cm.