You will need: 

- chiffon fabric cut (it is desirable that the pattern on the material was small).

Parts cut:

- sleeve - two parts;

- the facing for the neck backless top - one piece;

- the facing of the neck of the front - two parts;

the lower and the upper backrest and the lower part of the front – of one piece with a bend;

- the upper part of the front - two parts.

Allowances:

- one centimeter for the seams and slices of the product; 

- half a centimeter to the processing sections of obrazek;

- half inch to the processing-hem bottom.

Job description:

Treat with obcutek the corresponding parts of the front and rear of the appliance. The top front detail of top sostrochite strictly through the middle. It should at the same time to grind off and short sections of piping neckline forehand. Gather an Assembly in the seam on the front of the top and secure it. Stitch shoulder seams, at the same time grinding off short sections of obcutek the front and rear of the top. Sewn, and then iron smooth out all the allowances left in the seams. The neck of the top Tutuila, and if necessary further attrocites. Separately sew the side seams of the lower and upper parts of the top.Baste and pristrochite to the top product the bottom. Complete your seam. Sostrochite sleeves at the seam and vsheyte them in the appropriate openings. Seam prostrochite zigzag and zautyuzhte them on the sleeves. Fold, baste and stitch the hem of the sleeves. Attrocity and proutyuzhte seams.