You will need: 

- a piece of silk Jersey or silk satin;

- the usual Laundry gum (recommended width is at least 8 millimeters).

Parts cut items:

four items for the top of the top, one-piece with a halter;

- two parts with a bend for the bottom of the top.

Allowances:

- three centimeters at the upper sections of the lower parts of the top;

- half an inch for the drawstring at the lower sections of the upper parts of the top;

three inches on ACC bottom drawstring;

half centimetre slices.

Technology performance:

the Upper part of the dress in pairs you need to fold inside, right sides, and then defer around the perimeter. The areas where the top of the stamp needs to connect with his bottom should be left free. Parts are turned and smoothed. Further details of the front overlap with one another. As a result, must be formed of smell, and it is fixed by a pair of three hidden stitches. Stock left on the lower section of the items received, podgibayutsya inside and proslejivaetsya iron. The lower parts are sewn together along the side seams.At the same time until the upper edge of one of the seams end about three inches. Have received allowance of the upper edge podgibayutsya inside and prietaisams. The upper and lower parts are folded, right sides and worn down. The allowances of these items need to leave free. The drawstring is formed by pretrazivanja to the top of the top seam allowance on the lower section of the upper part of the product. Similarly, you drawstring on the bottom of the product. You should divide it into two equal drawstring machine stitching. On top of the product in odevaetsya kulisku gum.Short cuts zastrahovatsja drawstring (this need to capture and gum). Devuda gum at the bottom kulisku. The hem tucks and prostrachivajut. Straps curl up into tight bundles, and then uniformly fixed with concealed stitches. The ends of the straps are sewn to the back of the lower part of the dress from the wrong side.