You will need: 

- a piece of elastic knitted matter,

a special gasket (glue) for knitted fabrics.

Parts cut:

- 1 piece with a bend for piping the upper edge of the back of the product;

- the 1 detail with a bend for the straps;

- 2 parts for the back;

1 item with a bend to the front top.

Allowances:

- at least three inches on ACC hem; 

about a half cm slices.

Job description:

Fasten straps and a facing cut backs with pads. Baste and stitch the Darts on the back of the dress and the middle seam. The depth of the Darts couturaud to the middle of the back. Shift the facing top front top turns on the front side and prostrachivajut along the sections of each of the arm openings. Sheath / column folds inward face, grinds on the longitudinal slice is inverted and smoothed with an iron. The allowances of the armholes and the cap facing top front top turns inside out. The ends of the straps must be inserted into the recess in the upper corners.Further the product ustrahivaya from the front side edge at a distance of about 0.6 cm along the arm openings. Then prostrochite piping upper edge of the back, folded the front side and Topstitch on the facing allowances. Trying to capture the facing, sew the side seams of the top. Primatives facing to the allowances of the middle and side seams and Darts depths. The hem tucks and prostrachivajut to end, and then at a distance of 0.6 cm from it.