Shelves vest can be processed with rigid side strips and pads in the shoulders or can be completely without gaskets and linings.
Jacket with a straight line of the hem when cutting give allowance for processing bottom equal to 3-4 cm Neck, side and armhole treated pokrainini obrazkami of a fabric top.
The jackets soft unlined sections of the neck, the sides and the armholes are treated pokrainini obrazkami of a fabric top. For this part of obcutek grind off the seam width 0.5 - 0.7 cm, stitches rautureau. Processing the sides of the shelves carry out simultaneously with treatment of the neck backless. Side and shoulder seams of the vest sew, the seams rautureau.
Podborta with pricecanada obrazkami applied to the product, aligning the front side and the slices namachivajut, and then grind the seam width 0.5 - 0.6 cm rautureau Seams, piping turn, the edge of the spawn hand-stitches or on emergency vehicles. In the same way the treated sections of the openings, but the seams are not rautureau.
In a lightweight vest is unlined all the internal sections of otacek, podborov and bottom, as well as allowances of seams overcast on emergency vehicles. Steal of the neck, the sides, bottom and arm openings reinforce the finishing line.
The inner sections of obcutek at neckline attach hand stitches to shoulder seams, sew the hem to the side seams and Darts, and podborta obratnymi fasten with loops and buttons.
During the processing of the vests without the finishing stitches of the inner edge of the neck, the sides, the armholes and bottom clips hand uspeshnymi stitches, special vehicles or adhesive method.
Slices of vests can be turned over lining fabric or braid.
|