The cuts (slots) should be treated in the lower part of the side or joints on the front and rear panels of the skirts or in the folds. One of the main requirements to the processing of the slits is to strengthen the edges, giving them stability and strength. The processing of the slits in the side seams and connecting start smachivaniya, grinding and resoluzione seams. Smachivanie performed over the entire length of the seam, and stitching - to the area of the incision. From Lacanau of the stitch and remove the thread a temporary assignment rautureau seam throughout its length.
After trimming the bottom of the skirt on the allowances along the side seams, lay the gasket or edge. The gasket is placed in the upper part 1 cm above the incision and in the lower part - at the level of the bottom line bending. The adhesive strip is glued and nechaevu scribbled on the inner edge at a distance of 0.2 - 0.3 cm from the fold. Free cut strip falls under the eyelet sections of the side seams.
After processing the bottom of the skirt sections of the side seams to buckle, zametyvayut, priorivet and sutured to the allowance for bending the bottom (Fig. 86). Cuts priorivet from the inside of the product through damp protohellenic, keeping a single line of the side seam. A feature of the processing sections to press the folds is to strengthen the bends of the folds.
|