Friday, 29.03.2024, 11:51
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » Manufacturer of women's and children's outerwear

Treatment of sleeves and connecting them with the product

Treatment of sleeveless jackets and similar treatment of the sleeves in the coat (see Chapter 1, p 13). Distinctive features of the sleeveless jackets are the splines that handle at the bottom of the elbow joints. Slots are vitacreme, unfastened and open. 

 Sleeves with vitacreme slots. Front slices into the sleeves with vitacreme slots connect as well as in the sleeves without the slot. Then plan a line of bending the bottom sleeve and the splines. On the underside of the sleeve imposes a pad at a distance from the bottom line bending, equal to 0.1 - 0.2 cm, the end of the strip on the top half should not reach the inflection slots of 0.1 cm.

Primetyvajut gasket straight stitches with a length of 2 - 3 cm in the middle part. Then the upper edge of the strip stitched to the top fabric hand blind stitch the lines or on emergency vehicles blind stitch, and in the presence of the adhesive strips connect them with the iron.

Elbow sections combine and smatyvay on the upper half landing in the elbow straight a running stitch with long stitches 1.5 - 2 cm Sativum fit on the slices, and then grind those slices on the bottom half at a distance of 0.1 cm from the line of smachivaniya. The elbow sections to grind up to the upper end of the slots, then grind the slot on the planned line on three sides and lay the line down on the bottom line bending to the level lines of the piecing together sections of the elbow, and then down to lower edge of sleeve (Fig. 78, a).

The seam from the lower halves netscout in the top and bottom of the slots before reaching the line of 0.2 cm Elbow seam rautureau on a special pad; the iron slot in the upper halves of the sleeves. Seam slots is sutured to the strip stitching blind stitch slant stitch length of 0.7 - 0.8 cm or on emergency vehicles (Fig. 78, b). Bottom sleeve zametyvayut manual straight stitch length of 1.5 - 2 cm, or off highway. 

Further processing is slots is the same as in the conventional sleeve. 

 Sleeves and unfastened slots. Handling front seams, drawing a line of sleeves and slots, laying the strip on the bottom of the sleeves with the sleeves unfastened slots perform as well as in the sleeves with vitacreme slots. Before processing, the elbow seam the lower section of the sleeve zametyvayut on the strip at a distance of 2 cm from the edge of the straight stitches with a length of 1.5 - 2 cm hem and hand stitching blind stitch slant stitch length of 0.7 - 0.8 cm or on emergency vehicles blind stitch, not reaching the elbow of the cut lower halves 5 - 6 cm Hem sleeves priorivet through moist protohellenic.Elbow sections combine and smatyvay with the fit of the upper half at the level of the elbow hand straight stitches with a length of 1.5 - 2 cm, planting storevault, then grind the slices on the bottom half at a distance of 0.1 cm from the line of smachivaniya.

At the same time grind off on the planned line slot from two sides, by bending the allowance for bending the bottom from the lower halves (Fig. 78,).

The seam from the bottom half at the top of the slots netscout, not reaching a line 0.1 cm Then the elbow seam rautureau on a special pad until snug seam, and the slot of the iron in the upper half. Seam slots is sutured to the gasket and to the allowance of bending the bottom. Then the allowance for bending the bottom sleeve with the bottom halves of the hem stitching blind stitch slant stitch with a frequency of 3 to 4 stitch per 1 cm of the Bottom of the sleeves priorivet (Fig. 78, g). 

 Sleeves with open slots. Flatlock and razoruzhenie front seams and drawing a line of bending the bottom of the sleeves and laying the strips perform as well as in the sleeves unfastened and vitacreme slots. When applying bottom line bending additionally (for utility templates) find the line for grinding of angles of slots from the inside of the upper halves of the sleeves. On the planned line allowances on ACC bottom side of the elbow bend slices, folding them right sides inward and sew along the line from the allowance for processing the splines, not reaching the sections of 0.7 - 1 cm.

From the lower halves of the sleeves the corners of the slot to grind a seam width of 0.5 cm around the edge of the seam allowance on the processing of the bottom of the sleeves. 

The seam stitching of the corners of the slots from the upper halves rautureau, turn on the front side (Fig. 78, d). The side edges of the slots spawn, forming edge with a width of 0.1 - 0.2 cm Sleeve hem bend and zametyvayut on the planned line on emergency vehicles or by manual stitch length of 1.5 - 2 cm Stitches located at a distance of 0.5 - 0.8 cm from the side edges and 1.5 - 2 cm from the edge of the bottom of the sleeves.

Elbow sections smatyvay with the fit of the upper half the level of the elbow, landing sativum, grind the slices on the bottom half of the seam width of 1 cm, ending with a line 0.5 cm below the bent edges of the slot (Fig. 78, e). Elbow seam from the lower halves netscout at the top of the slots before reaching the lines of 0.1 - 0.2 cm, and rautureau, the slot iron to side the upper halves of the sleeves. Prutivka the bottom of the sleeves and the final Ironing processing is the same as in the sleeves with vitacreme and unfastened slots.

In some models, the sleeve may be slit at the elbow joints (Fig. 78, W, z). In this case the processing of the sleeve is the same as processing the sleeve with an open slit, only when applying lines outline the angle of the upper and lower halves. The splines then grind a seam width of 0.5 cm, rautureau corners cut, turn and spawn. Further processing described above. 

 The connection of the sleeves with the product. The connection of the sleeve with the product and treatment of the openings in the jackets are the same as in the coat (see Chapter 1, p 13). Feature is the change in the number of landing on top part of the sleeve when matiwane in connection with the property of the fabric. 

Distribution of landing sites the sleeve, the percentage remains the same as for coat. 

FINAL FINISH COAT 

Final finish coat consists of the following operations: serging loops, removal strings to the temporary duty assignment, cleaning, final wet-heat processing and sewing buttons.

All these operations finishing of the finished product described in Chapter 1, p 17.



Category: Manufacturer of women's and children's outerwear | Added by: 21.05.2018
Views: 427 | Rating: 0.0/0

Total comments: 0
avatar