Tuck in skirts create the necessary figure fitting from the waist to the hip. Their number depends on the model of the skirt, the difference in measurements between poluobhvat waist and thighs and ranges from 3 to 5. Depending on the model tuck can be sacanime in length, turning into soft or press the pleats. Darts are perpendicular to the hips. Before treatment tucks mark, as described above (see Chapter 1, p 6).

In the learning process before stitching the tuck smatyvay. Smachivanie perform manual straight stitches with a length of 1 - 2 cm from the upper edge of the skirt by the end tucks, with clips at the beginning and the end. When smachivanie the details of the skirt is placed on the table, tuck bend in the midline and smatyvay on hand. Flatlock produce a symmetrical Darts on - one top down and one bottom up. In the upper part of the tuck is fixed by machine setting length of 0.7 - 1 cm, and at the end of the line negated, ending the clip with a length of 0.7 - 1 cm, or the ends of the thread tie a knot.

Tuck iron, directing their allowances in the centre of the front and rear panels, or according to the model. Before septugenarian recommended priotity tuck with one and other. 

Princess seams in the skirts depending on model treated sew-in sock seam with open cuts, sew-in sock seam closed cut or patch seam with a shut cut. 

Creases in appearance divided into bridging, nastronie, overhead unilateral and bilateral. They can be performed on a single detail, or combine two or three parts. The location and direction of folds depending on the models skirts.