The figure depicts summer embroidered dress. 


Dress at the neck, cuffs and hem mill embroidered pattern of different widths, but repeating the same motives. The embroidery is done with colored embroidery floss or silk in soft colours. 


Fabric for dresses can be of any quality - light, preferably white. Lantern sleeve down to the cuff. Neck curly, no collar. Front yoke notched on the back - straight. 


Construction drawing dress patterns dresses 

On the main drawing patterns need to make some changes (Fig. 381).

 Flirty backless. On the main drawing of the pattern from point A down delay of 16 cm and mark the point K. From the point C down to postpone also 16 cm and mark a point K1. Points K and K1 to connect a straight line - get the yoke back. The mill is back to expand to 15 cm (dotted line). 

 Yoke front. Points B2 and G1 to connect with a smooth curve - get a yoke before. 

Mill the front to expand to 17 cm (dotted line).
 

 The neck of the dress. On the back of the point And down to postpone 1 cm and mark the point P3, from point P1 on the shoulder to postpone 1 cm and put an end P2. Point P2 connecting the point P3 with a smooth curve, 

On the shelf from point B1 on the shoulder to postpone 1 cm and put an end B3. From a point B2 down to set aside 10 cm, mark the point B4. Then the points B3 and B4 to connect a curved curve line, as shown in Fig. 381. 

 The sleeve is drawn in the same way as the sleeve in Fig. 378, only more expanded.
 

Cutting and tailoring dress 

To arrange the details of the patterns on the twice folded tissue. Obscurity, adding to the seams. To carve out the time. Mark the centers of all the details of the dress. Sweep and zastrochit shoulder seams, then mark the distance from the edge of neckline, make the embroidery away from the edge of the neckline by 2.5 cm (0.5 cm will go into the seam during the processing of the neck). To connect the yoke with the lining. Baste and stitch the sides of the dress. Gather the top of the mill into two thread, tack to the yoke. To do a fitting. To outline the filing of a bottom, then pull the basting connecting the yoke and the mill.The bottom of the mill to embroider, putting embroidery on a 12 - 15 cm above the bottom of the dress, and then again to tack the camp to the yoke and to pristroit silk threads (silk stitching looks good and cotton fabric).

The neck of the dress to handle podkralas the facing of the fabric of the dress. 

Sew the sleeve, hem bottom, and a strip of fabric cross, tuck and stitch from the edge of the binder, leaving nezastroennoe 1 cm (the hole for threading elastic). The top of the sleeve assembled on two lines, to stretch to the width of the armholes (Assembly on the sleeve "flashlight" is only half of the openings 7 and 9 cm either side of shoulder seam, below the sleeves only slightly pripisivaem), votati in armhole. Sew.