This apron you can sew an old dress. 

Style developed on the pattern basic dress drawing (Fig. 30).
 

 The front of the apron. From the top of the neck at the shoulder to the left cut set aside 3 cm, and the depth of the neck down - 10 - 15, see Point 3, 10 to 15 connect. Then from the neck to the right armhole at the shoulder cut put 2 see Point 2 connect the end of the shoulder tuck a smooth line, extending it to the end of the pulley-block Darts. From the waist line on the side slice up and set aside 4 - 5 cm and from point 2 at the shoulder side down - 6 - 7 see Point 6 - 7, 4 - 5 connecting a smooth line, extending to the left 5 - 10 cm (desired length of apron).

From the line down the middle of the front of the cloth up and set aside 4 - 5 cm, side cut - 20 - 25 see Point 4 - 5, 20 - 25 connecting straight line, continuing it over the side of the cut at 11 - 15, see Point 11 and 15 connect with the point 5 - 10. 

From the waistline at the side cut down put 10 - 12 cm, conduct smooth line from the first line of tackle Darts through a point 10 to 12 to the intersection with the line entering the apron. 

To get draping on the sides of the apron draw the section line, dividing line of tackle Darts into 3 parts. From the points of division we draw lines to the intersection with the side cut.

For applying lines of the cut pattern.

For entry straps on the back will continue until the length of their measurements of length backless to waist plus 5 - 6 cm, podtraivaet straps separately (Fig. 31 a). 

Piping for handling sections of the apron is cut on the bias fabric width of 3 to 4 cm, and for treatment of the neck - by a transverse filament (Fig. 31 b).

To obtain assemblies for applying the pattern lines and cut apart by 3 cm (optional). To cut out the two parts together with a burlap pocket with a length of 20 cm, width 15 - 18 cm For processing the upper edge of the pocket podtraivaet burlap in the form of a line of the pocket's length and width equal to the bottom. 

From barrel to cut out the two parts with a length equal to the circumference of the waist plus seam allowance on the bow 20 - 25 cm. Width of the belt as desired.