BLOUSE WITH CAP SLEEVES 

Size 42 
Measurements: 
length backless to waist ..... 34 cm 
shoulder length . . . . . . . . . . ..13 cm 
neck circumference................ 17 cm 
waist circumference.............. 33 cm 
the circumference of the armhole........... 34 cm

Build back. Figure 72 

Take line plan 23.5 cm calculate 1/6 of the circumference of the neck plus 0.5 cm on loose fit, plus 13 cm shoulder plus 1 cm on the landing shoulder the back, plus a 3.5 cm sleeve length: neck circumference 34 : 6 = 5,6 (rounded 5.5 cm) 5,5 + 0,5 + 13 + 1 + 3,5 = 23,5 see
Build the rectangle ABC with a size of 23.5 cm by 37 cm, 37 cm - back length to waist 34 cm plus 3 cm.
From point A on a vertical drop of 1.5 cm (for all sizes), from point A right line plan delayed 6 cm calculate 1/6 of the circumference neck plus 0.5 cm: neck circumference 34 : 6 = 5,6 (about 5.5 cm) 5,5 + 0,5 = 6see 
Point 6 and point 1,5 connecting concave line, and get the neck back.
From point B down delay 7 cm (bevel shoulder for all sizes this style), point 7 and point 6 connect the straight dotted line, line dashed lines divide into three equal parts, from the top division down under right angle delay of 0.5 cm Concave line from the hands of the join point 6 through the point of 0.5, through the bottom point of the dividing point 7 and get shoulder backless. From point 7 down vertical lay off 17 cm from the calculation 1/2 circumference of armhole: armhole circumference 34 : 2 = 17 see
Line 17 cm divide in half, from the dividing point to the left at a right angle delay 2 see the Concave line hand-drawn armhole from point 7 through point 2 to point 17. 
From a point In the right on a horizontal line-delayed 16.5 cm from calculate 1/4 waist circumference: waist circumference 66 : 4 = 16,5 cm 
Point of 16.5 connecting straight dotted line with the point 17, dotted line divide in half, from the dividing point to the left at a right angle postpone 1 see the Concave line from the hand connecting point 17 point 1 point 16.5 and receive side of the back.

Build shelves. Fig. 73

Take line plan 27.5 cm calculate 1/6 of the circumference of the neck plus 1.5 cm, plus 13 cm-shoulder, plus a 3.5 cm sleeve length plus 4 cm on a free fit chest: neck circumference 34:6=5,6 (about 5.5 cm) 5,5 + 1,5 + 13 + 3,5 + 4 = 27,5 see 
Build the rectangle ABC with a size of 27.5 cm by 39 cm, 39 cm - back length to waist plus 3 cm plus 2 cm: back length to waist 34 + 3 + 2 = 39 cm 
From the point A to the left of the line plan delayed 7cm calculate 1/6 of the circumference of the neck plus 1.5 cm (for all sizes): neck circumference 34 : 6 = 5,6 (about 5.5 cm) 5,5 + 1,5 = 7 see
From point B vertically lowered to 6 cm (for all sizes this style). From the point 6 to the right at a right angle delay of 4 cm and point 4 connected by a straight line with point 7. From point 6 on the verticaldown 17 cm from calculation 1/2 of the circumference of the armhole: the armhole circumference 34 : 2 = 17 see 
Line 17 cm, divide in half, from the dividing point to the right right angle delay 4.5 cm (for all sizes). Concave line by hand combine point 4 point 4.5 point 17 and the resulting armhole shelves.
From 17 points down vertically pushes the length of the sides front equal to the length of the sides of the backrest (from the point 17 to the point of 16.5, in the drawing marked by two lines). The length of the sides of the shelves are denoted by the point T. the Point T connected by a straight line with point V. From the points In the left-delayed 7 cm, 4 cm, 3 cm and 4 cm From point 7 and point 4 raised vertical lines for 5 cm, then the top point of the connecting lines from point 3 and point 4 we raise 5 cm, the top of the lines connect and get tuck-pleats.
From point A to the left of the line plan delayed 1 cm from point A vertically down to 12 cm From point 7 up under right angle to the shoulder line hold the line 7. calculate 1/6 of the circumference neck plus 1.5 cm: neck circumference 34 : 6 = 5,6 (about 5.5 cm) 5,5 + 1,5 =7 see 
point 7 to the right at a right angle draw the line widths collar 4 cm Concave line from the hand connecting point 4 via point 1 point 12 and a drawn collar. 

Cutting and sewing 

the Middle of the back and shelves of the blouse have a fold of material. Cutting and sewing the blouse according to the rules.
Armhole sleeve handle podkralas or piping. 
Collar handle Podkayne padbottom that podtraivaet only by tailoring products, in the middle of the front below the point 12 on the 5 6 see 
Mid-collar blouse has a seam, and podborny should have a fold of material. 
When you cut of the blouse as the top of the dress to add in at the waist 2 - 5 cm, if will croatica blouse, then add at least 14 - 16, see the Blouse by the waist can be elastic. 

BLOUSE WITH CAP SLEEVES AND UNDERCUT the ARMHOLE 

Size 40 
Measurements: 
length backless to waist........34 cm
the circumference of the chest............... 40 cm 
neck circumference ................. 17 cm 
the circumference of the armhole............. ZZ cm

Build back. Fig. 74

Take line plan 18 cm from the calculation of 1/4 the circumference of the chest minus 2 cm: circumference of the chest 80: 4 - 2 = 18 cm
Build the rectangle ABC with a size of 18 cm by 37 cm, 37 cm length backless to the waist plus 3 inches: length backless to waist 34 + 3 = 37 cm
From point A is vertically lowered by 2 cm (for all sizes this style), from the point A to the right of the line plan delayed 5.5 cm based 1/6 neck circumference: neck circumference 34 : 6 = 5,6 (about 5.5 cm).
Point 5.5 point 2 connected by hand a concave line and get neck backless blouse.
From point B down-delayed 4 cm (bevel shoulder for all sizes), then from the point of 5.5 across the 4 point hold a straight line and put it on her the sleeve length, 25 cm From point 4 down vertically defer 17.5 cm from the calculation of 1/2 of the circumference of the armhole plus 1 cm to the circumference of the openings 33 : 2 + 1 = 17.5 cm
From the point of 17.5 vertically lowered by 6 cm (undercut), then from point 6 to the right draw a horizontal line 6 see Point 6 connect the straight dashed line with point 25, the line of dashes divide in half, from the dividing point to the left at a right angle delay 1 see Concave line from the hand connecting point 25 through the point 1 with point 6.
From a point In the right on a horizontal line lay off 6 cm from a point 6 right delayed another 3 cm, 3 cm, divide in half, from the point of dividing up raising the dotted line 10 cm (length tuck), point 10 connectedstraight lines, with point 6 and point 3 and get a tuck. 

Build shelves. Fig. 75 

Take line plan 27 cm from the calculation of 1/4 the circumference of the chest plus 2 cm (taken from the back), plus 5 cm for the tuck the circumference of the chest 80 : 4 + 2 + 5 = 27 see
Build the rectangle ABC with a size of 27 cm to 39 cm, 39 cm - back length to waist plus 3 cm plus 2 cm (in front of the blouse to the waist long backless 2cm): back length to waist 34 + 3 + 2 = 39 cm. 
From point B to the left of the line plan delayed 6.5 cm is based 1/6 neck circumference plus 1 cm: neck circumference 34 : 6 = 5,6 (about 5.5 cm) 5,5 + 1 = 6,5 cm
From the point of 6.5 the left on line plan-delayed 3 cm, from a point 3 at a right angle down to 0.5 cm, a point 0.5 point 6,5 joined by a straight line. From a point 0,5 drop a vertical line 18 cm (length Darts for all sizes). From point 3 to the left of the line plan delay 5 cm, then store the straight line from point 18 to point 5, lay off on it the value of Darts equal to 18 cm, and denotes the point B1. 
From point A down to 6cm from the calculation of the taper of shoulder 3.5 cm plus 1/2 tuck: the bevel shoulder is 3.5 + tuck 5 : 2 = 6 cm.
Then the point B1 is connected by a straight line with point 6 and put it on her the shoulder length of the shelf equals to the length of the shoulder back, minus 1 cm: shoulder length backless 25 - 1 = 24 cm 
From the point B1 must be delayed 21 cm: shoulder length shelves 24 - 3 (distance from point of neck to tuck) = 21 see 
point 6 vertically falls to 16.5 cm from calculation 1/2 of the circumference of the armhole: the armhole circumference 33 : 2 = 1B,5 cm
Point of 16.5 connecting straight dotted line from point 21, the line dashed lines divide in half, from the dividing point to the right at a right angle postpone 1 see the Concave line from the hand connecting point 21 through the point 1 point of 16.5. 
From a point 16.5 cm to the right draw a horizontal line 6 cm (undercut, undercut equal to the armhole of the backrest). From the point of 16.5 in vertical drop, the length of the sides of the shelves, equal to the length of the sides of the backrest (from points 17.5 to point G in the drawing is indicated by two lines), and put point T. Point T connected by a straight line with point b.
From point G the left waist-delayed 7 cm from the point 7 to the left - 6 cm; a distance of 6 cm, divide in half, from point of division is lifted up the dotted line 12 cm, 12 point connected by straight lines, with point 6 and point 7 and get a tuck at the waist shelves, 
From point B on vertical drop of 8.5 cm from calculate 1/6 of the circumference of the neck plus 3 inches:neck circumference 34 : 6 = 5,6 (about 5.5 cm) 5,5 + 3 = 8,5 see
Point 8.5 cm connecting straight dotted line with a point of 6.5, line dashed lines divide in half, from the dividing point to the left at a right angle delay 1.5 cm Concave line from the hand combine point to 8.5 using point 1.5 point 6.5 and plotted neck. 
If the dividing point dotted line to defer 1.5 cm to the right at a right angle, we get shaped neck (shown in broken lines). 

Cutting and sewing 

the Middle front and back have fold material and has been the common thread.
When you cut blouse with cap sleeves, you need to add the seams 1 see Instead of shoulder Darts to make small folds in which remove 5 cm, that is, every wrinkle is 2,5 cm 
In first smatyvay tuck, then shoulders. Side of the back from point to 17.5 to the point G smachivaetsya with side shelves from a point 16.5 to point T. Line podraza backless b - b smachivaetsya line podraza shelves of 16.5 - 6, and line podraza backless 17,5 - 6 is sewn to the armhole of podraza shelvescoverstitch seam to nothing at both ends like tuck.
The neck is treated Podkayne material, armhole sleeves with bias binding.