SPORTS JACKET

Size 36
Measurements:
the length of the jacket............... 43 cm
the circumference of the chest........ 36 cm
neck circumference........... 16,5 cm
the circumference of the armhole.......32 cm
sleeve length............... 40 cm

Build back. Fig. 85

Take the plan line AB, equal to 18 cm, at the rate of 1/2 of the circumference of the neck plus 1.5 cm: neck circumference 33: 2+ 1,5 = 18 cm.
From a point And drop a vertical line to the 43 cm - length of the product.
From point A vertically lowered to 18 cm from the calculation of 1/4 the circumference of the chest: the chest circumference 72: 4=18 cm.
From the point 18 to the right draw a horizontal line chest 23 cm from the calculation of 1/4 the circumference of the chest plus 5 cm free customized fit for all size: bust 72: 4 + 5 = 23, see
From point A to the right of the line plan delayed 6.5 cm from calculate 1/6 of the circumference of the neck plus 1 cm: neck circumference 33: 6+1=6.5 cm.
From a point 6,5 rise to 1.5 cm (for all sizes) . Point 1,5 combine by hand a concave line with point A and receive neck backless.
From point B down to 2 cm (bevel shoulder for sports jackets of all sizes). From point to 1.5 point 2 hold a straight line so that the line is out the point 2 by 1 cm, and obtain the shoulder backless.
From point 2 to the line of the chest drop dashed vertical line and determine its point G. From point G on the dotted line rise by 5.5 cm (for all sizes) . Dotted lines divide the angle G in half and put it on her 2.5 cm.
Concave line from the hand combine point 1 through point of 5.5, through the point 2,5 point 23 and get the armhole of the back.
From the 23 point drop a vertical line to the bottom of the product and is connected to the point 43. The resulting angle is denoted by the point D. From point D lay off to the right, 2,5 cm, 2,5 point connected by a straight line with point 23. Line 43 is the middle of the back, has a fold of material and cut out the common thread.

Build shelves. Fig. 86

Take the plan line AB, equal to 18 cm, at the rate of 1/2 of the circumference of the neck plus 1.5 cm: neck circumference 33: 2+ 1,5 = 18 cm.
From points And drop a vertical line from 45 cm calculate the length of the back to the waist plus 2 cm for the shelf: length backless to waist 43 + 2 = 45 cm.
From point A fall to 18 cm from the calculation of 1/4 the circumference of the chest: the chest circumference 72: 4= 18 cm.
From the point 18 to the left draw a horizontal line of the chest 27 cm from the calculation of 1/4 the circumference of the chest plus 9 cm on free fit for all size: bust 72: 4 + 9 = 27 see
From point A to the left of the line plan delayed 6 cm calculate 1/6 of the circumference of the neck plus 0.5 cm: neck circumference 33: 6+ 0,5 = 6 cm.
From point B down to 3 cm (bevel shoulder for all sizes). Point 3 connected by a straight line with point 6 and get the shoulder shelves.
From point 3 on the Breasts drop dashed vertical line and label it point G.
From point G along the dotted line rises by 5 cm, the remaining dotted lines divide in half. From the dividing point to the right at a right angle delay of 0.5, see Dashed line divide the angle G in half and put it on her 2 see hand-concave line connecting the point 3 through point of 0.5, point 5, point 2 with point 27 and get the armhole shelves.
From the 27 point drop a vertical line the sides of the shelves, equal to the length of the sides of the back, and denoted by the point D (to do this, measure the line side of the back from point 23 to the point D, in the drawing designated by two dashes).
From point D lay off to the left 2,5 cm, 2,5 point connected by a straight line with the point 27 (line equal to the length of the sides of the back, in the drawing designated with three dashes) . Connect a 2.5 point free line point 45. From the point 45 to the right draw a horizontal line 5 cm (on Board).
From A vertical fall to 6.5 cm from calculate 1/6 of the circumference of the neck plus 1 cm: neck circumference 33: 6+ 1 = 6.5 cm.
From the point of 6.5 to the right, draw dotted line horizontal line 5 cm (on Board), from a point 5 raised by 1.5, see Point 1.5 and point 5 (bottom) mated by a straight line. Concave line from the hand combine point to 1.5 point of 6.5.

The construction of the sleeve. Fig. 87

Take line plan 32 cm calculate the circumference of the openings and build the rectangle ABC with a size of 32 cm to 48 cm, 48 cm - sleeve length.
From point A on a vertical drop of 10.5 cm from the calculation of 1/3 of the circumference of the armhole: the armhole circumference 32: 3= 10,6 (about 10.5 cm).
From the point of 10.5 right draw a horizontal line to the line BG and denoted by the point P.
Line plan of divide AB into six equal parts, the points of division denoted by the points A1, A2, A3, A4, A5. From each point of division omit the vertical line is 10.5 P.
The intersection of the vertical line from the point A4 with a line of 10.5 P denotes the point P1, the intersection of the vertical line from point A5 with a line of 10.5 P denotes the point P2.
From A vertical fall to 6.5 cm, from a point A1 to 1.5 cm, the point A2 is the high point of the head sleeve. From point AZ drops 2 cm distance П1П2 divide in half, the dividing point falls at 0.5 cm from point B by 6.5 cm
When all the points are placed, hand-drawn head sleeve: lead the line from left to right from a point 6,5 1,5 point to point A2 (high point), point 2, point P1, point 0,5 point P2 to the point of 6.5.
From a point In the right and the point G lay off to the left and 2 cm From point A4 drop dashed vertical line and label point D. From point D on the dotted line rises by 1 cm, point 1 connected by straight lines with 2 points on both sides of the sleeve.
Right sleeve from a point 6.5 and point 2 to the front left to the back. Line dotted line when cut is placed on equity.
The collar of a sports jacket you can take the design of collars jackets for boys (Fig. 79, 80) or a pioneer blouses.

Cutting and tailoring

When you cut to allow for the seams by the rules.
Sewn jacket coverstitch seam and only when made from lightweight material, lapped, according to the rules of development of sewing products with sides.
Jacket can be done on the belt, the width of the belt as desired. If the middle of the front zipper, the Board priderjivat not necessary.
According to the drawing pattern sports jackets, you can cut the top of pajamas for boys.

BRIEFS FOR BOYS

Measurements:
knee-length ............ 46 cm
the circumference of their hips......... 40 cm

Construction of front halves. Fig. 88

Take the line plan, 22 cm from the calculation of 1/4 the circumference of the hips plus 2 inches: circumference of hips 80: 4+ 2 = 22 cm
Build the rectangle ABC with a size of 22 cm by 37 cm 37 cm taken from the calculation of 2/3 length knee-length plus 6 cm: knee-length 46: 3x2=30,6 (about 31 cm) 31+6=37 cm
From point A down to 27 cm from calculation 1/2 length knee length plus 4 cm: knee-length 46: 2+4=27 cm
From the point 27 to the right draw a horizontal line so that it went over the line BG of 5.5 cm from the calculation of 1/4 of lines of the plan: plan 22: 4=5,5 cm
This line is determined by a line step. Then point to 5.5 connect the dotted line with the point G and the line of dashes divide in half. From the dividing point to the left at a right angle postpone 1 cm and a concave line from the arm connecting point and 5.5 point 1 with point g, and draw the cutout for the legs.
From b rises by 1 cm, point 1 connected by straight line with point G.
From point B to the left of the line plan delayed 2 cm Distance from the point B to the line of step divide into three equal parts. Line from the hand from point 2 through the bottom point of division, and to the point 5,5 plotted the line of the front bow halves of cowards.

Building a back half. Fig. 89

Take line plan 24 cm from the calculation of 1/4 the circumference of the hips plus 4 SL: 80 circumference of hips: 4+4=24 see
Build the rectangle ABC with a size of 24 cm 37 cm 37 cm taken from the calculation of 2/3 length knee-length plus 6 cm: knee-length 46: 3x2 =30,6 (about 31 cm) 31+6=37 cm
From point B down to 27 cm from calculation 1/2 length knee length plus 4 cm: knee-length 46:2+4=27 cm
From the point 27 to the left draw a horizontal line so that it went over the line AB is 10 cm from the calculation of 1/4 of lines of the plan of the front half plus 4.5 cm: a line plan of the front half 22:4 + 4,5 = 10 cm.
From point 10 down to 2 cm Beyond point At the left draw the line 2 cm and point 2 connected by the dashed line. Dotted line divide in half, from the dividing point to the right at a right angle postpone 1 cm and the connecting concave line from the hand point 2 through point 1 with point 2.
From point A rise of 4 cm in point 4 which is connected to point 2 (point 10) dotted line. Dotted line divide into four parts. From the midpoint dividing the right at a right angle lay off 1 cm from the bottom - 2 cm.
When all the points are placed, a concave line from the hand connecting point 4 via the upper point of division, through the point 1, point 2 lower position 2 and the plotted line of the middle of the rear halves of the pants.
From point G rises by 1 cm, point 1 connect line with point 2.

Cutting and tailoring

Tailor pants twice in the expanded view (Fig. 90). The pattern of the transfer pattern is applied to the backside panties to the side line was in the joint. On the side pant seam should not be. If the material is narrow, the wedges of any size prostrachivajut only to the back half. Can be cut briefs without the addition to the seams. Briefs are sewn lapped seam. In the legs zapisyvayutsya backwards. The top and bottom are hemmed my ACC: width of the ACC top - width usteriki, bottom - 1, see For the strength at the top of the ACC is the stitching in the region.