Fig. 14

Measurements:
length vests......... 26 cm
neck circumference............. 12 cm
the circumference of the chest.......... 24 cm
Take a line plan - the horizontal line at the rate of 1/4 of the circumference of the chest plus 2 inches: bust 48 : 4 + 2 = 14 cm 2 cm is given on the standard for free fit for all sizes, and therefore 2 cm must be added for all sizes.
Build the rectangle ABC with a size of 14 cm 26 cm 26 cm - length vests.
From point B to the left draw a horizontal line 8cm and put the point 8. From point 8 down line of 10 cm from a point 10
to the right the dotted line to the intersection with the line BG. From the point of intersection of the dotted line to the left putting off and 2 cm down 3 cm From a point 10 the line rises 2 cm and set point 2.
From the point G lay off to the left of 3 cm and set point 3, from point 3 rise 1 cm
When all the points are placed, the arms are concave line from point 2 (left) through the point 2, point 3 and down to point 1. This is the side the pins. Line VG, divide in half and put the sign "x". From point 1 are from the hand of the free line, gradually fading to the point of division (the so mowed down the sides of the bottom of the product).
From point A on the line of the left delay of 4 cm is based 1/6 neck circumference: neck circumference 24 : 6 = 4 cm.
From point A down 5 cm from calculate 1/6 of the circumference of the neck plus 1 cm (on all sizes for loose fit): neck circumference 24 : 6 + 1 = 5 see
Point 4 and point 5 being joined by concave line and get neck front vests.
From point A vertically down by 1 cm, point 1 connect a smooth line with point 4 (plan) and receive neck backless vests.

Cutting and tailoring

The line AB is the midpoint of the front and back vests and cut out the common thread. Boca stitched lapped seam.
The back has a slit. The neck undershirts is handled by piping is evident. Primatyvajutsja bias binding to face the inside of the undershirts for Golovinka, sewed, Unscrew there, the seam on the edge and we used the machine stitching wkra. Ties can be cut with bake or sewn into the incision of the neck. The neck can be treated with lace or crochet tie. The bottom of the vests and sleeve hem his hem - width 0,5 - 1 see

CAP. Fig. 15

  Measurements:
head circumference........ 36 cm
Construct a square ABC from the calculation of 1/4 of the circumference of the head plus 3 cm: head circumference 36 : 4 + 3 = 12 see
3 cm is constant and is added to all dimensions.
Lines AB and BG divide each in half. From point A to the left of the line plan delayed 3 cm From point B to the right of the line plan as well delayed, see Line 3 VG divide in half; from a point of dividing up delay of 0.5 cm From the point In left-delayed 2 cm from point G to the right - just 2 see When all the points are placed, connected by hand a concave point line 3 (top), the dividing point of the vertical lines with the lower point 2. Then the concave line connecting 2 points on the line of VG through the point of 0.5.
The cap consists of two parts: the occipital and flat strip covering the crown and sides of the head. Smooth the strip goes from the calculation of the width of 11 cm or 9 cm and length 16 cm Length 16 cm so we find: measure head circumference in the drawing, the nape, and the obtained value divide in half.
In this case, the measurement showed that the circumference of the drawing is 32 cm, then the length of the strip: 32 : 2 = 16 cm.
Build the rectangle ABC with a size of 9 cm x 16 cm Line plan AB has a fold of material. The VG line divide in half. From a point In the left and dot G to the right by line postpone 1 cm and put point. From points 1 (left and right) rises vertically 1 cm of the Line AB and BG each divide in half, and the points of division by straight lines connecting points 1 (top). Point 1 paired with point dividing the line VG.
Sewn cap or reverse lapped seam. Cap you can tie, finished with lace or firmware.

ENVELOPE. Fig. 16

  Measurements:
the length of the envelope . . . . . . . . . . 100 cm
width ................................ 30 cm
Take the plan line AB, equal to 100 cm and construct a rectangle ABC with a size of 100 cm by 30 cm (width). Lines AB and BG divide in half, and the points of division joined. Line plan of divide AB into five equal parts and from each point drop a vertical line to VG. From the dividing point on the line AB lay off to the right 13 cm and a point 13 which is connected to the point In a straight dotted line. The line of dashes divide in half. From the dividing point to the left at a right angle delay of 3 cm and a concave line connecting point 13 through point 3 with point B.Rectangles 1, 4, 5 of the superstructure to security that should be cut.

Cutting and tailoring

The envelope of the line VG has a fold of material and cut out the common thread. The envelope may be stitched to the lining, which is cut on the same pattern. Then fold the envelope and the lining of the face and sew all around, except one side of the bottom, and turn inside there. Unsewn on the machine part is sealed by hand. The envelope can be finished with lace.

ПОЛ3УНКИ. Fig. 17

  Measurements:
waist circumference....... 24 cm
Take line plan 26 cm from calculation 1/2 waist circumference plus 2cm for loose fit: waist circumference 48 : 2 + 2 = 26 cm
The angle of the plan denoted by the point A. From points And drop a vertical line from 24 cm calculate 1/2 waist circumference: waist circumference is 48 : 2 = 24 see
From point 26 (plan) continue the line to the right at 17 cm from calculate 1/4 waist circumference plus 5 cm: waist circumference 48 : 4 + 5 = 17 cm.
From a point 24 (the vertical line), continue down the vertical line at 17 cm from calculate 1/4 waist circumference plus 5 cm: waist circumference is 12 + 5 = 17 cm.
Point 17 point 17 connected with a straight line. Right corner of the plan denoted by the point B, the lower point of the V.
From point B on the line BV-delayed 17 cm calculate 1/4 waist circumference plus 5 cm: waist circumference 48 : 4 + 5 = 17 cm.
From the point 17 along an inclined line delay 14 cm calculate 1/4 waist circumference plus 2 cm: waist circumference 48 : 4 + 2 = 14 cm.
From the point 14 to the right at a right angle lay off 1.5 cm.
From a point on an inclined line go up to 14 cm from calculate 1/4 waist circumference plus 2 cm: waist circumference 48 : 4 + 2 = 14 cm.
From the point 14 to the right at a right angle lay off 2 cm, the distance between points 14 divide in half, and from the dividing point to the left at a right angle delay 6 cm (for all sizes). When all the points are placed, by hand connecting with the concave line of 1.5 point through the point 14, point 6, point 14 point 2 and get a cut for the legs. A straight line connecting the point 17 with a point 1.5 and point b with point 2.
The sliders are made with buttons.

A COMBINATION OF "FROG"

  Measurements:
the length of the "frog"....... 30 cm
the circumference of the chest..........30 cm
the circumference of their hips........ 28 cm
neck circumference........... 13,5 cm
Combination consists of bra and panties.

The construction of cowards. Fig. 18

Take line plan 60 cm based thigh circumference plus 4 cm on the standard for free fit for all sizes: circumference of hips, 56 + 4 = 60 cm.
Build the rectangle ABC with a size of 60 cm by 30 cm, 30 cm - length of the product.
From the point G lay off up and to the right 3 cm From a point up and to the left as well-delayed at 3 cm In both cases, point 3 of the connected concave lines.
The plan line AB divide in half, and from the points of division omit the dotted line at 12 cm for prorezki. Prorezka treated plank No. 1 (Fig. 156).
From point A rise up to 5 cm and 5 connected by a straight line with the point of division lines of the plan.

The construction of the bra. Fig. 19

Take line plan bra AB is 10 cm (standard for all sizes).

From the point B drop a vertical line 26 cm (length to waist), line 26, divide in half and from the dividing point to the left hold the dotted horizontal line 13 cm from the calculation of 1/4 the circumference of the chest minus 2 cm: chest circumference 60 : 4 - 2 = 13 cm.
From the point 26 to the left draw a horizontal line 20 cm from the calculation of 1/4 the circumference of the chest plus 5 cm: chest circumference 60 : 4 + 5 = 20 cm
From point 20 up delay 5 cm From point A through point 13 to point 5 draw by hand a concave line of armhole bra.
From point 26 the drop 4 cm and the connecting point 4 a straight line with a point 20 is the line of descent of the front. From the point 20 to the left draw a horizontal line 35 cm (for the bow) and from a point 35 up at the 4 cm Point connected by a straight line with point 5.
We now turn to the design of the neck.
From point B to the left of the line plan and down put away 5 cm from calculate 1/6 of the circumference of the neck plus 0.5 cm: neck circumference 27 : 6 + 0,5 = 5 cm.
Point 5 and point 5 combine by hand a concave line and get neck backless bra. Then from the point B drop 10 cm (standard for all sizes), point 10 connected slightly concave line with a point on the line plan and get the neckline of the front bodice.

Cutting and tailoring 

Front and back of the bra are cut in an equity thread, one pattern.
The bra is cut in the shape with no neck, then individually cut neckline front and back.
Briefs "frog" has been unfolded, the front and back together, stitched lapped or coverstitch seam.
The middle of the backside and the front of cowards "frog" have a seam. Front of bra is sewn to the briefs. To ass panties cut out the belt from the calculation of 1/2 of the circumference of the chest plus 2 inches: bust 60 : 2 + 2 = 32 cm.
Belt width is 8 cm the Belt can be one-piece with the bodice front or pristroennym.
The neckline is processed with bias binding, and there is inside out. If the neck under the neck, in the middle of the back is cut open and processed plank No. 1 (Fig. 156). Pant legs elastic.