DRAWINGS OF PATTERNS COLLARS 

To build the collar fit scoop neck circumference or neck of the finished product. Width of collar is optional or depends on style log.

The collar of the team. Fig. 150

Take a line 30 cm from calculation 1/2 neck circumference plus 12 inches: neck circumference 36: 2+ 12 = 30 cm
Build the rectangle ABC with a size of 30 cm by 14 cm, 14 cm is taken from the calculation of the width of the collar multiplied by 2: the width of the collar 7 x 2 = 14 cm.
The line AB, divide in half, point dividing the join of the straight dotted line from point G, a line of dashes divide in half, from the point of division up at a right angle lay off 1.5 cm of the Concave line connecting the point G through the point 1.5 point division. This line is the line terminations to the neck.
The point a and the point G connecting the straight dashed line, dotted line, divide in half, from the point of division up at the right angle defer 3 see the Concave line connecting the point G through the point 3 with point A.
The mid collar has a fold of material and cut out the common thread. When you cut, you should allow for seams and 1 - 1.5 cm is recommended to Cut four times, with the lining (the bottom part of the collar).

Shaped collar sports casual for ladies and children's dresses, blouses and mens t shirts. Fig. 151

Take the line plan, 22 cm from calculation 1/2 neck circumference plus 4 cm on the length of Cape: neck circumference 36:2+4=22 cm
Build the rectangle ABC with a size of 22 cm by 9 cm Width 9 cm is taken for all sizes.
From a point up vertically, lay off 1 cm From point G to the left on the line VG-delayed 4 see Point 4 connected by a straight line with point B, then point 4 connect the straight dotted line from point 1, a line of dashes divide in half, from the point of division up at the right angle delay of 0.5 cm Concave line from the hand connecting point 4 point 0.5 point 1.
From point 1 on a vertical rise of 3 cm (width of collar). Line plan of divide AB into four equal parts and denoted by the points 1, 2, 3. From division 1 down to 5 cm, from the points of division 2 - 4 cm from the point of division is 3 - 3 cm a Concave line connecting point 3 point 5 point 4 point 3 with point B.
The middle of the collar can be tailored to equity or transverse thread. When you cut, you should allow for seams and 1 - 1.5 cm Cut is recommended along with lining, four times. Such collar is a strip of cloth.

Contoured fold-over collars. Fig. 152

Here are two style turn-down collars.

Collar No. 1

Take line plan 20 cm from calculation 1/2 neck circumference plus 2 cm: neck circumference 36:2+2=20 cm. 
Build the rectangle ABC with a size of 20 cm by 19 cm Width 19 cm is taken for all sizes.
From point A vertically down to 6 cm From point B to the right the dotted line 3 see Point 3 connect a straight dotted line with the point 6, the line of dashes divide in half, from the dividing point downwards at a right angle delay 1 see the Concave line connecting the point 3 through point 1 with point 6. From point 6 vertically lowered to 8 cm (width of collar), from point 1 to delay 3 see Point 3 connect a straight dotted line from point 8, the dotted line divide into three equal parts and the points of division denoted by the points 1,2.From the points of division 1 up at a right angle postpone 1 cm and from the points of division 2 - 0.5 cm When the points are placed, the connecting concave line point 8 point 1 point 0.5 point 3.
Line BG divide in half, and the concave line connecting point 3 (top) through the point of division point 3 (bottom).
The collar is specifically made for a share thread, indicated in the drawing. Cut should be four times, along with the lining when you cut to allow for seams of 1 - 1,5 cm to the collar lay better, it is possible to do with the gasket.

Collar No. 2

Take line plan 18 cm from calculation 1/2 neck circumference: neck circumference 36:2=18 cm
Build the rectangle ABC with a size of 18 cm by 8 cm where 8 cm is the width of the collar.
From point B raise a dotted line 5 cm (for all sizes), point 5 connected straight dotted line with a dot And dotted line divide in half, from the points of division at right angle down to 1.5 cm in Free concave line connecting point 5 through point 1.5 point A. This line is the line terminations to the neck. From the point G to the right, draw dotted line horizontal line 10 cm (for all sizes of this style), from a point 10 falls to 1.5 cm of the Free line connecting the point 1.5 and point G. Then by a straight line connecting the point 1.5 and point 5.
The line AB is the midpoint of the collar, has a fold of material and cut out the common thread. In the collar to lay the canvas or starched fabric. When you cut to allow for the seams of 0.5 - 1 cm

Shaped rolling collar. Fig. 154

Take the plan line AB, equal to 27 cm From the point B drop a vertical line to 45 cm From the point 45 to the left draw a horizontal line 18 cm From point B on a vertical drop of 16 cm (the width of the middle of the collar), point 16 connected straight dotted line with the point 18, the line of the dotted line divide into three equal parts and the points of division denoted by the points 1,2. From the points of division 1 up at a right angle lay off 3 cm from the points of division 2 - 5 cm Concave line connecting point 18 point 3 point 5 point 16. Along this line, the collar is sewn to neck.
From points And drop a vertical line is 24 cm and point 24 connected by a straight line with point 18. From the point 24 vertically rises by 10 cm, from point 10 to the right, draw dotted line horizontal line 8 cm From point 8 drop dashed vertical line 5 cm, point 5 connected straight lines with the point 24 and the point 10. Point 10 connected straight dotted line from point B, the line of dashes divide in half, from the point of division up at the right angle defer 3 see the Concave line from the hand connecting point 10, point 3 with point B.
The middle of the collar 16 B is hidden common thread, has a fold of material. Cut collar is recommended four times along with the lining when you cut to allow for seams of 1 - 1,5 cm
All the figures in the design of this collar are standard on all sizes, except for the line terminations to the neck from point 18 to point 16. This line is taken from the circumference of the neck of the finished dress.

Round collar. Fig. 155

To tailor the round collar, the pattern of the back and front being applied in the joint lines of the shoulders and then draw the collar of any width. The middle of the back of the collar should have a fold of material and cut out the common thread. If the pattern is a tuck at the shoulder line, tuck should be closed and then draw the collar, but it is better to use a pattern, without Darts at the shoulder.