Dress made of colored silk, or cotton. The front panel of the cap with the insert, the top of which is laid in soft folds. The middle of the front to Pedraza on the skirt with the zipper. Casting wedge're slightly. 

The rear panel of the three wedges. Side seams at the waist line cutting. For slim figure can be prioraty, and the full rear panel piece better. Vtachnoy sleeve, three-quarter (Fig. 19 a). 

A dress of this style can be recommended in proportion to folded shapes.
 

For applying lines of the pattern to be cut (Fig. 19 b). To keep the basic lines of the pattern, along the lines of flared gussets cut teeth or remove each wedge with a chisel, put it under a pattern a clean sheet of paper. 

Back panel cut on the obtained parts of the pattern. The side wedge of the skirt at the waist add to the Assembly 4 - 5 cm depending on the figure. Full figure as opposed to the Assembly can be slightly propositi wedges at the waist or to carve out a wedge cap.
 

The front panel (Fig. 20 a, b, C). To obtain the draping along the line of podreza to cut on the lines caused the pattern and push for 6 - 8 refer To the correct connection details to put control points on the waist line. Bottom line the bodice to make the seam, and reserves of 3 to 4 cm to allow fitting to raise or lower the line of podraza. For this purpose we add more to the seams and insert. To obtain ruched wedge limb tissue pattern away from 8 - 10 cm (Fig. 20).