Binding — a narrow strip of fabric that are sewn along the edges of the product.

Gate — cut product designed for the neck.

To votati — temporarily connect the parts at concave and curved lines.

To vacate to connect two or more parts with a curved or concave lines.

Pattern — the pattern of a garment, often running out of paper half figures life-size, without allowances for seams.

The basic pattern drawing of the product on the basis of which to develop the other styles in this group.

Sweep — remove bridging the seam, to make a transition edge with a size of 0.1 cm and secure it straight or slanted stitches.

Tuck — a piece of fabric, Ushuaia in parts to give it the desired shape.

Dekatirovka — wet heat treatment of the fabric with a view to its shrinkage.

Share thread (base) thread of tissue running along the edges.

Dolevik strip of fabric to strengthen the pocket, whether the common thread.

Groove (track from date of purchase) — the deepening from the connecting seam on the front side of the fabric.

To baste — to temporarily fix a straight or slanted stitches bent edge products.

To zastrochit — 1) lay machine line; 2) to connect the parts of a machine seam.

Will irons — bend both cut the seam in the desired direction and priotity.

Wrong side (purl side) — the reverse side of the garment (or fabric).

Cut the fabric, cut the pattern with the seam.

The pattern — product drawing (pattern) with the addition to the seams.

To baste — to temporarily connect the parts cut, put one of them to another.

Topstitch — remove the bridging the seam in the desired direction and fix it, paving finishing line.

Neaten — processing sections of the joints of the connected parts.

To oblachat — connect the two parts, then twist them so that the fabric allowances on the seam was inside.

The facing — cut from fabric item intended for raw edges.

To steam — iron a little fabric on the front side, using wet gauze.

Defer — to connect the two parts, obtusate them to turn out, sweep out, priotity, lay the finishing line.

Stitching — the distance between the edge of the product and finishing line.

Quickdraw — increase hot iron unfastened edges (collar, flounces, Basques). Used to get the nearby area of the concave surface (e.g., near the front edge of the sleeve).

Delay slightly pulling the fabric to be ironed through a damp cheesecloth or thin fabric (pulling produce to increase any details).

To iron using hot iron to remove from the surface of the fabric folds, bends, wrinkles.

The transition of the edge — roll seam connecting for altaceno the edge of the part from the front side of the product on the other.

The valance is a rectangular strip of the main fabric with a height of 7-8 cm that you want to Topstitch on the top part of the bottom of the burlap Welt pockets.

Podrobnyi seam — machine stitch, used in the binder connector of the cut (the bottom of the product). For its implementation need to bend the cut from the face on the wrong side at 0.5 cm and Then bend the whole seam allowance to the binder, tack and pritchet 0.1 cm from the first bend.

Hem to secure the hem edge parts of a hidden seam.

Flat seam , manual seam, is used to hold the bent edges. His stitches are not visible from both sides of the product. The frequency of the stitches in an average of 4-5 stitches per 2 cm binder.

Landing — reduce the length of the cut parts. When connecting two parts one of them the other is kept free so cut free the parts is shortened (pripisivaem).

Tack — temporarily connect the two parts.

To pripasayte is to reduce the size of the parts cut. To do this, above and below the main line of primaqiune laid a running stitches, fabric for yarn shrinks to the desired size.

To pritchet — linking machine stitch the pieces of different sizes.

Priotity — with the help of the iron to reduce the thickness of the folds or bending.

Sew — attach the finished product, the accessories (hooks, buttons, rivets, etc.).

Cushioning stitch — hand stitch, used for marking the middle of the back, front, sleeve etc. It should perform the basting stitches on a single layer of fabric. Stitch length can vary between 1 and 3 cm Distance between stitches on the front side is 0.5–0.7 cm

to Resaturate — spread out the seam allowance and the seam on both sides and Ironing.

Just waste — pre-razoruzhenie connecting seam secure with machine stitching.

Sweep — a line connecting two or more parts temporary stitches. For example, the sweep of the shoulder or side seams.

Sew — to connect the machine line is pre-sour cream the products details.

Stitch — the distance between the two needle punctures.

Stojka — giving shape fabric to shrink in the desired direction. To achieve this effect place the subject stuike, you need to moisturize inside out, propositiva cloth, flatten it with a hot iron.

Sucurity — iron fabric through a damp cheesecloth or a thin fabric, reducing the length of the part of the product.

Joint width — the distance between cut parts cut from the connection seam.