Friday, 29.03.2024, 17:54
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » Sew yourself

Rules for cutting, sewing and processing products

STUDY OF POCKET "LEAFLET"


The cut of the pocket outline basting. Down and up from the outline at a distance of 0.25 cm to navigate even undo (Fig. 159 a).
Cut burlap - any fabric for the pocket, preferably of fabric products. The width of the burlap should be wider slit pockets 3 cm
Burlap is applied to the face to face products so that the edge of the burlap was below the lower outline of the 2 cm and burlap were cut to 1.5 cm on each side. Sew the burlap on top of the basting.
Cut the material into the leaf together with burlap pocket (burlap and leaf from the same material as the product). The length of the burlap comes from the calculation of the length of pocket plus 4 cm for the leaf, the width of the pocket-burlap wider slit pockets 3 cm
Bend on the front side 2 cm over the width of the burlap. Away from the edge of the fold to 1.5 cm tag, fall down to 1.5 cm, from the point of 1,5 - to the edge. Stitch area on labels, cut out the corners (Fig. 159 6) .
In the corners of the seams make the notch, the leaves turn and there is rautureau (Fig. 159).
To the lower outline of the face products put the face edge of the leaf, the pre-tilting 2 cm previously sewn on burlap, and sew along the edge of the leaves. When two burlap sewn, cut along the middle basting, so to cut in the middle, not dorezaya to the each end of the line by 1.5 cm (Fig. 160 g). From the incision in the corners of the lines to make the notch. Burlap turn inside out products, leaf remains on the face.
The burlap first bite straightened out so that 2 cm was above the cut of the pocket (under the leaves with the inside of the product). The bags are sewn three sides, capturing the corners of nasechek slit pockets, then around a rare overcast stitch seam to oblamalis. The leaflet attached to the product, capturing 2 cm burlap, to make it stronger and not to break the product in the attachment of the leaves. All resuturing on the underside of the product.
Patch pockets treated lining and sew to the product so as not to be visible stitches. On products made of light fabric, pockets can be sewn on the machine in the region.
 

PROCESSING BODICE FOR SKIRTS


The corsage is made of special printed grosgrain ribbon, folded in half and stitched zig-zag in shared direction. Grosgrain ribbon can be replaced with canvas.
The top of the skirt to buckle inside out to 1.5 cm and scribble on the face, away from the fold by 0.25 cm of thread to the color of the product. Then hand sew the corsage with attached loops and hooks.

Sew loops and hooks to her bodice

Cut the cloth according to the width of the bodice and a length of 4 cm (the cloth can be satin, cotton, twill, etc.), it was applied to the end of the corsage and margins from the edge 0.5 cm, sew. Cloth bend through the suture around the suture (Fig. 160). The cloth is stitched to the loop so that it was above the edge of the edging to half of its magnitude (loop), and away from the edges of the width of the bodice by 0.5 cm Hook is sewn, away from the second edge of the width of the bodice by 0.5 cm so that its nose was at the level of the edge of the edging (Fig. 160 b)
When hook and loop is sewn, is a horizontal line under the bottom of the hook. The cloth bends so that it reached the second bend to the edge of the border and with edging sew over the edge with small stitches. At each end of the corsage against loop is sewn to the hook and against the hook - loop (Fig. 160).
To do on one side of the loop, on the other hooks is not recommended. The front side of the corsage where the nose hooks.
On the sides of the bodice do two loop-hanger length 6 - 7 cm (satin, cotton, twill, etc.).
 

SHORT RULES SEWING OUTERWEAR


Coat sew by the rules sewing outerwear.
Great importance in the study of coats have a strip of canvas in the sides. Before primitivity podboranky, it is necessary to tack the gasket (the canvas) to Board coat, away from the edge by 0.25 cm Then podborny tacked on with large stitches gasket is attached to the side of the product, capturing only the lower string side.
The upper part of the garment and the strip needs to be accurately connected to each other and the fabric should not be pulling or planting.
The edge of the Board product to process artificial edge (as in products made of light fabric), you can sew thin edge piping. Edge need to sew the stitches invisible on the front side.
After processing side, it is necessary to compare the length of both sides. In the case of different lengths, it is necessary to equalize the processing of a Board.
The coat also has a lining (canvas) and is processed by a running lines as the Board.
When the gasket (rubber) processed primetyvajut podborny and collar, then prostrachivajut on the machine.
The sleeve to the coat should be double seam and stachivaya according to the rules of tacki double seam of the sleeves.
When sewing a coat is necessary every seam, every detail is well processed to resaturate.
When designing a winter coat is necessary to consider the allowance for insulated material: cotton batting, fur, etc. the Amount of the allowance from 2 to 5 cm and depends on the thickness of the layer of insulation material (preferably heat-insulation material to make as thin as possible).
On insulated material to embarrass and when you cut a coat.
Winter coats are single-breasted and double-breasted. Single breasted have the smell of 4 - 5 cm, double-breasted 8 - 10cm for children's products and to 12 cm for adults.
Lining and insulation material are cut according to the pattern coat with less width podportila.
Insulated material as the lining, are sewn to the coat on his hands.
 







Category: Sew yourself | Added by: 12.10.2017
Views: 459 | Rating: 0.0/0

Total comments: 0
avatar