Chetyrehchastnaya skirt with Welt pockets in the front wedges, the zipper. Drawing the pattern given for size 48 III growth (Fig. 32).
 

The same skirt can be made with patch pockets and without pockets, double belt loops, pockets on the back wedges, etc. (Fig. 33).
 

Running skirt in soft wool, crimplene or heavy silk of all colors. Available for 44 - 50 sizes. Fabric consumption at width 90 - 100 cm two length skirt, with a width of 140 cm to length of articles 44 - 46 of a size to allow for a brace of 4 - 5 cm, 48 - 50 size - 15 - 20 cm 

 double seam Skirt (flared). Runs from the soft, easily draped fabric. Width of fabric for the skirt should be not less than 120 cm (Fig. 34).
 

The fabric consumption for 44 - 48 dimensions length 70 cm - 1.5 m. 

Offered for tall, thin women. In the side seams of this skirt can make the inner pockets. 

 Skirt chetyrehchastnaya. Front and back tailored seams for a share. This skirt can be done with shresthi. In this case, by the middle of the front to add 10 - 12 cm Possible to simulate a skirt with a yoke of any shape. In this case, the pattern being cut into pieces and to cut out with seam (Fig. 35).
 

 Skirt one-piece bell. This skirt is suitable for any shape looks good and short, and long. Very easily and quickly sewn. You can make it from any fabric. The amount of fabric is determined as follows. Build a square whose side is two thirds the volume of the waist plus the length of the skirt. For example, the waist 75 cm skirt length 70 cm, then the side of the square will be equal to 50 + 70 = 120 cm, Therefore, the fabric need: 1 m 20 cm with a width of 120 - 140 cm and two times more narrow (with a width of 70 - 90).Narrow cloth cut into two pieces, grind the edge with the edge, smoothes the seam on both sides and only after that cut.

First, we add the edge (or equity thread) with a cross cut. The fold will be the middle of the front of the skirt (Fig. 36 a). Then fold the fabric again so that the bend line is formed at the edge (Fig. 36 b). It is the middle of sewing the skirt. 

Line equal to a quarter of the waist, drawn with chalk evenly arc (Fig. 36). The difference 1 - 2cm is not dangerous, its easy to fix the fit at the waist. 

From the cut of the waist (also four times folded tissue) arc lay off the length of the skirt plus 3 - 4 cm for the binder. Grind back seam, sew a zipper, sew the belt, filed the hem, ironed, and the skirt is ready.

It is better to sew a skirt from a smooth cloth or with a small figure (polka dots, small flower). As the front of skirt braid, and the back straight, the larger the figure - the cell, the strip is "broken" and looks ugly. 

 Skirt with four accordion pleats on the left side. Running of wool, and heavy silk. Pattern given for size 48. Cut the front panel in expanded form. 

Fabric consumption at width 150 cm one length with the stock 5 - 8 cm, with a width of 80 - 90 cm - two lengths (Fig. 37).
 

 Skirt with inverted pleats - three on front panel, two on rear (Fig. 38). The middle crease you can draw lacing, stitching, clasp hinged loops, etc. (Fig. 39). 

The consumption of tissue is the same as for the previous model. Offered for 48 - 56 sizes! Better suited cloth of dark colours.