Costume for boy preschool consists of jacket and short or long trousers (Fig. 81 a). 

For summer costume using denim, cotton and other light fabrics to a winter - wool, wool blend, corduroy and other fabrics. 

Trim suit - embroidery, soutache, braid, etc. 

Jacket for boy preschool 

The drawing of the pattern must be removed following measurements (in cm): 

1. The semicircle of the neck - 13 

2. The semicircle of the breast - 28

3. Semicircle waist - 28 

4. Semicircle hips - 30 

5. Back length to waist - 26 

6. Shoulder width - 9

7. Sleeve length - 32 

8. Jacket length - 40 

Construction drawing patterns 
 

The plotted rectangle АА1Н1Н (Fig. 81 b). 

 The width of the jacket. Side AA1 and НН1 equal to 34 cm - the measure of the semicircle of the breast plus 6 cm for all sizes: 28 + 6 = 34 cm 

 Length of jacket. Side of the rectangle and an А1Н1 equal to 40 cm - measure the length of the jacket. 

 The depth of the armhole. From point And put down a 14.3 cm - 1/3 measurements of the semicircle of the breast, plus 5 cm for all sizes. A new point will be denoted by G.
 

AG = 28 : 3 + 5 = 14,3 cm

From the point G to the right will draw a horizontal line to the intersection with the line А1Н1 and the point G1. 

 The waist line. From point A down put 26 cm - measure the length of the back to the waist and put the point T. From this point to the right will draw a horizontal line to the intersection with the line А1Н1. Put the point T1. 

 The width of the backrest. From the point G to the right put 12,3 cm - 1/3 measurements of the semicircle of the breast plus 3 cm for all sizes - and the point G2.
 

ГГ2 = 28 : 3 + 3 = 12,3 cm

 The width of the openings. From a point G2 to the right, put 9 cm - 1/4 of the semicircle of the breast plus 2 cm for all sizes - and put an end G3. 

Г2Г3 = 28 : 4 + 2 = 9 see

Points G2 and G3 hold the perpendiculars to the intersection of the line AA1 and put the points P and P1. 

 Line sides. From a point G2 to the right put 2 cm and put an end G4. From this point drop a perpendicular down to the intersection with the line НН1. The point of intersection will be denoted by H2. 

The construction of the back 

 Neck. From point A the right postpone 4.8 cm - 1/3 of the semicircle neck plus 0.5 cm for all sizes of: 13 : 3 + 0,5 = 4,8 cm

From point 4.8 of up put 2 cm and the point S. the Point A and W connecting concave line. 

 The slope of the shoulder and shoulder line. From the point P down put 2 cm From point W through point 2 (the slope shoulder) draw the shoulder line is 10 cm - the measure of the width of the shoulder plus 1 cm for all sizes. The point P2. 

 Line openings. From the point G2, dividing the angle in half, put 2 cm, and from the point G4 up 0.5 cm Line openings hold to the point P2, referring to the line ПГ2, through points 2 and 0.5. 

The construction of the front 

 Neck. From the point A1 to the left put 4.8 cm - 1/3 of the semicircle neck plus 0.5 cm for all sizes. From a point up to 4.8 postpone 1 cm and put an end to SH1. From point A1 down put 4.8 cm - 1/3 of the semicircle neck plus 0.5 cm for all sizes - and the point R2. Points SH1 and ø2 connecting concave line. 

 The slope of the shoulder and shoulder line. From point P1 put down 2 see Through this point from a point SH1 draw the shoulder line, equal to 9 cm,- measurement of shoulder width. 

 Line openings. From the point G3, dividing the angle in half, set aside 1.5 cm armhole Line will go from point 9, on line П1Г3, through the point 1.5 and point of 0.5. 

 Side seam. From the point H2 to the left set aside 1 cm Line of the side seam of the hold point 0,5 point G4 to the point 1. The point of intersection with the waist line will be denoted by T2. 

 The waist line. From point T1 down put 1.5 cm This point is connected to point T2. 

 The bottom line is. From the point H1 down put 1.5 cm, this point is connected with point 1. 

 The increase on the zipper. From the points R2 and 1.5 to the right put at 2 cm from point 2 up (neck) - 1 see All these dots being connected. 

 Patch pocket. From the point to the left of 1.5 (waist) put off 7 cm from it down 3 inches and put a point K. From the point To the left put 9 cm and the point K1. From the points K and K1 down put on 9 cm and will put points K2 and K3. These points are connected. 

 The pocket flap. From points K1 and put down at 2.5 cm, the resulting points joined by the dashed line, which divide in half. From the points of division set aside 1 cm Point of 2.5, 1 and 2.5 combine.

The construction of the sleeve 

The plotted rectangle АА1Н1Н (Fig. 82). 

 Sleeve width. Side of the rectangle is equal to AA1 and НН1 28,6 cm - 1/3 measurements of the semicircle of the breast, plus 5 cm for all sizes multiplied by 2.
 

AA1 = НН1 = (28 : 3 + 5) x 2 = 28,6 cm

 Sleeve length. Side of the rectangle and an А1Н1 equal to 32 cm scoop length sleeves. 

 The height of the top part of the sleeve. From point A down set aside 9.8 cm - 3/4 the depth of the armhole of the jacket minus 1 cm for all sizes - and the point R.
 

AR = (14,3 : 4 x 3) - 1 = 9.8 cm

From point R to the right draw a horizontal line to the intersection with the line А1Н1. A new point denoted by P1. 

 The elbow line. Segments PH and Р1Н1 divide in half and from the points of division set aside up to 2 cm and put the points L and L1. These points are connected. 

 The auxiliary lines. The line AA1 divide into four equal parts. The dividing point will be denoted by O, O1 and O2. From these points drop perpendiculars to the line НН1 and the point of intersection will be denoted by H2, H3 and H4. The point of intersection of the line О2Н4 with the line PP1 denoted P2. 

 Line of lifts the shoulders. The segments AR and А1Р1 divide into three equal parts and the upper point of division is denoted O3 and O4. Point O3, O, P2 and O4 connected by dashed lines. The intersection of the dotted lines ОР2 line О1Н3 denote O5. All the segments of the dotted lines divide in half, and from the points of division set aside: О3О - up 1 cm, 5 - up 1.5 cm, from О5Р2 down 1 cm and Р2О4 - down 1, see the line of the top part of the sleeves draw through the point O3, 1, and 1.5, O5, 1, P2, 1 and O4. Oh - high-point sleeves. 

 Sideline. From the point N to the right and to the left of point H1 postpone 2 cm From point 2 (left) put down 1 cm Line on the left side carry through the points O3, R, L, 2, and 1 right - through all the points O4, R1, L1 and 2. 

 The bottom line is. From the point H3 up set aside 1 cm and the bottom line is draw through the point 1, H2, 1 and 2.

The construction of the collar 
 

The plotted rectangle ABGW (Fig. 83 a). 

 The length of the collar. Side of the rectangle of AB and VG is 16 cm - the measure of the semicircle neck plus 3 cm for all sizes.
 

AB = VG = 13 + 3 = 16 cm

 The width of the collar. Side of the rectangle of AB and BG is equal to 8 cm is a constant for all sizes. 

 Line terminations. From point A the right defer 5.3 cm - 1/3 measurements of the semicircle neck plus 1 cm for all sizes of: 13 : 3 + 1 = 5,3 cm 

From point B to the left set aside 3 cm, from point 3 down - 2 see Points 2 and 5.3 combine.

 Mysyk. Points 2 and G connected.

 Bottom line. From the point put up In 1 see Points 1 and G connected. 

Short trousers for a boy of preschool age (size 28) 

The drawing of the pants shoot the following measurements (in cm): 

1. Semicircle waist - 28 

2. Semicircle hips - 30

3. Pants length - 30 

Construction of front halves 

Draw a right angle with vertex at point A (Fig. 83 b). 

 The length of the pants. From point And put down a 30 cm - measure the length of pants and put the H-point 

 Line step. From point A down put 21 cm - 1/2 measurements semicircle hips plus 6 cm for all sizes - and put an end to this sh
 

AL = 30 : 2 + 6 = 21 see

 The width of the pitch. From the point W to the right, put a 20 cm - 1/2 measurements semicircle hips, plus 5 cm for all sizes - and put an end to SH1.
 

ШШ1 = 30 : 2 + 5 = 20 cm

From point N to the right will draw a horizontal line equal to 20 cm - the measure of the width of the step - and put the point H1. From point N1 up through the point SH1 will draw a vertical line to the intersection with the top line and put the point T. 

 the line of the bow. From a point SH1 to the right and put up to 3 cm - 1/10 measurements semicircle hips and put points ø2 and ø3. From a point SH1, dividing the angle in half, set aside 2 see the line of the bow draw through point T, ø3, 2 ø2 to the point. 

 Strap for closure. From the points T and SH3 right put to 3 cm and the point T, 3, 3, and SH3 join. 

 The waist line. From the point T to the left set aside 17.5 cm - 1/2 measurements semicircle waist plus 3.5 cm for all sizes - and put the point T1.
 

ТТ1 = 28 : 2 + 3,5 = 17,5 cm

 Line the sides and strap. From point A down put 12 cm and the point P. From the points T and P to the left at a right angle put on 3 see the Points T1, N, 3, 3 connect. 

 Line seam and bottom of the pants. From the point ø2 point H1 will draw the line seam, extending it by 2 cm, and the point H2. The points N2 and N connected. 

 Line soutwick and tuck on the waist line. Line ШШ1 divide in half and through the point of division will hold the up and down vertical line. The point of intersection with the waist line will be denoted by T2, and the bottom line is - N3. Т2Н3 - line saulugne. From the point T2 to the right put a 2 cm Distance T2 2 - depth of Darts, and the length of the tuck - arbitrary. 

Building the back half 

Draw a right angle with vertex at point A (Fig. 83). From point A down put the measure pants length 30 cm and put the H-point. 

 Line step. From point A down set aside 21cm - measure the stride length of the front halves of the trousers and the point W. From point W to the right, put a 20 cm - the measure of the width of the step and put an end to SH1. From point N to the right put 20 cm and mark point H1. From this point through the point SH1 will draw a vertical line to the intersection with the upper line; the point of intersection will be denoted by T. 

 the Width of the step and the line of the seat. From a point SH1 to the right and up put at 3 cm and put points ø2 and ø3. Dividing the angle in half, put 2 cm From point R2 to the right set aside 5.5 cm - 1/4 of the semicircle of the measurements of the hips minus 2 cm for all sizes: 30 : 4 - 2 = 5.5 cm. 

From the point T to the left put 4 cm and put the point T1. This point is connected to point SH3 dotted lines, which divide in half. From the point of division is at right angle put 0.5 cm From point T1 up in the direction of the dotted line will put 4 cm and the point T2. Line seat carry through the points T2, T1, 0,5, SH3, 2 and ø2.

 Stepper seam. Point R2 is connected to point H1, extending the line about 2 cm, and the point H2. From the point D2 to the right set aside 3 cm and the point N3. This point is connected to point of 5.5. On this line put the length of the seam of the front halves (distance Н2Ш2 from the drawing pattern of the front halves of trousers). A new point will be denoted by Ш4. Point ø2 and Ш4 connect. 

 The waist line. From point A to the left draw a horizontal line of arbitrary length. From the point T1 to the left set aside 19.5 cm - measurement waist line front halves of trousers plus 2 cm and the point T2. Points T3 and T1 connectivity. 

 Side seam and placket. From the point N to the left 2 cm aside and let a point H4. This point is connected to the point T3. From the point T3 down put 12 cm and the point P. From point P, and T3 is left aside for 3 cm and all those dots connected. 

 The bottom line is. Points H4 and H3 connected. 

 Tuck on the waist line. Line Т2Т3 divide in half. From the point of division of left and right set aside 1.5 cm, down - see Point 7 1,5, 7 and 1.5 connected.