On the main pattern of the back and front draw line style summer dress is made of cotton fabric. 

 Back (Fig. 42 a). Through the openings from the middle of the back to the left put 5 - 6 cm. From the obtained point set aside 3 cm (width straps). On the shoulder from the armhole put 5 cm, note the width of the straps and the resulting points connected to the points of the straps through the openings. Line flounce proposed as follows. From the bottom up on both sides of the pattern set aside for 20 see the resulting points are connected, then the line cut the ball divide into three equal. parts and from these points hold down the vertical line cuts. 

 Before (Fig. 42 b). From the neck down through the middle of the front set aside 12 see Point 12 is connected to the armhole with a dotted line. The resulting line will split in half and the dividing point up put aside 8 - 10 see Point 10 is connected to point 12 and the lower part of the openings of the concave line. From the armhole down the line put sides 8 cm and this point is connected to point 12 of the concave line. From the point 12 to the right set aside 3 cm, from the hip line up to 8 - 10 cm, from the received point to the right 3 see All those dots being connected. A-line cuts to flounce running as a pattern on the backrest. 

 The layout on the fabric. The pattern of the back and front being cut on the cutting lines. All pattern pieces attach to the fold of the fabric at common thread. The top part of the bodice is expandable on the bottom to form assemblies (Fig. 42, g). 

Details of the Shuttle sliding on 10 cm and more for assemblies. Allowances for seams produced, as indicated in the drawing.