Before ultimanium collar at the neck you need to check the length of the sides of the neck on the right and left shelf. This will peregnoem the product in the middle of the front and back, working the shoulder seams and the seam of the neck Skolem pins, check the width of the shoulder seams. If one of the sides of the neck stretched, you need to collect it in two threads, to pull, sucurity up the slack.

Upper and lower collar fold face inside. Primetam unfastened piece collar, equating slices and lightly landing in the corners of the upper collar, grind at the lower collar seam width 0.7 cm Extra fabric at the corners to be cut, leaving a seam allowance of 0.3 cm rasutim Stitches, turn the collar on the front side, straighten corners, nametype, releasing the roll from the top of the collar, Ataturk and note the middle of it. 

 The connection of the collar with the neck in the jewellery clasp to the top. Attach the collar to the inside of the bodice front side top to the underside of the products, even slices, Skolem the middle of the collar to the middle of the back, the ends of the collar with nadrezkoj in the neck. Sweep away from the collar, slightly propositiva the neck in oblique sections, the seam width of 0.5 - 0.7 cm prostrochite side of the collar, the seam will tognum to the collar. Cut the bottom of the collar bends inwards 0.7 cm, manually filed or scribbling in the seam primaqiune. 

 The connection of the collar with the neck in the products with flaps. Collar fold the bottom part to the front of the unit, aligning the middle of the collar to the middle of the back, the ends of it with nadrezkoj in the neck. Primetam both layers of the collar to the neckline from the notch to the shoulder seam, make nadziejko 1 cm in the upper collar, tognum it primetam lower collar to sprout. Will tognum padbolt on the front side of the product, urovnem slices PrimeTel and pristrochite, by bending the upper collar of Rostock. Remove the basting, cut the upper collar will pomognem and put that together to sprout hand-stitches for the seam primaqiune.

 The connection of the collar oblique or podkralas the facing to the neck. Prepared collar fold the bottom part to the front of the unit, equating slices, Skolem pins the middle of the collar to the middle of the back, and the ends with the middle of the neck. The facing width of 3 to 4 cm primetam face, pristrochite seam with the width of 0,5 - 0,7 cm Tognum the facing on the underside of the product. The second section of piping will pomognem to the side and sew hidden stitches. For products made of cotton fabrics of the second section of piping can be pristroit on the machine.

Oblique or podkralas the facing sewn following collars: lapel, escape, collars, bias-cut threads.