SANDY
 

Sandy (Fig. 27) is mainly used in hot summer time when the heat panties body RUB and impede normal circulation.

When cutting out the sandbox you can use the simple drawing of a shirt (see Fig. 23), adding to the drawing, a narrow strip of fabric at the bottom.

A strip of cloth (Fig. 28) is a rectangle of height 12 cm and width 6 cm. in the drawing the strips, you need to draw a rectangle KLNM.

 The bottom line is. Line MN be divided in half and put the point O. From point O to hold the left horizontal line to the intersection with the line KL.

Horizontally from a point On the left to defer 3 cm and place the point of P. Then connect the points M, P, N a smooth curve line.

 Line the middle of the strip. Stripes cut on the fabric folded double the grain lines - the line KL. Detail stacked mid-to-fold fabric and cut out. Then one edge of the strip primetyvajut to the primary and pritachivajut, combining lines of the middle parts.

The free edge of the strip attached to the front button on the front of the shirt.

BLOUSE WITH SLEEVES 

Blouses for children vary in style, size and purpose.

Blouse for baby, designed for insulation, usually sewn closed and wearing on top of vests.

Blouses, depending on the time of year sewn from soft warm or thin fabric: flannelette, pique, flannel, chiffon, Zephyr, and Batista.
 

In the manufacture of blouses with sleeves and a collar (Fig. 29) for a child 1 - 3 months. use the following measurements in inches:

To blouse sleeve To collar
Length...... 26 Length .... 18 Length .... 15
Width... 28 Width ...Width 15 .. 7

For child 3 - 12 months. value is changing, as mentioned before.

Drawing back and front 

Drawing blouses are building as well as the drawing of the pins. The back and front of the building in a single drawing.

The drawing of the pattern you want to draw a rectangle (Fig. 30) ABGB, where the lines AB and VG is equal to the length of the blouse, and the lines AB and BG is the width of the blouse minus 2 cm.
 

Before the construction of the main drawing should be applied to the auxiliary lines.

 The first auxiliary line. This line separates the back from front. From the point A to the right horizontally to delay period equal to 1/2 of the line AB, and place a point D. From point D to hold down the vertical line to the horizontal line BG.

On the left side of the building a drawing of the back, and on the right - front blouse.

 The second auxiliary line. From point A down the vertical delay to 1/10 of a line AB and place a point E. From point E to the right, draw a horizontal line to the intersection with a vertical line VG. The intersection of this line with the vertical line passing through the point D, mark the point J.

 the Line of the neck backless. From the point A to the right horizontally to delay 1/4 line AD and put an end 3. From point A down the vertical to postpone 1 cm and received a point to connect with a smooth curve from point 3. This line will be the neckline of the back.

 The line of the shoulder cut. Point 3 and linking. This line will be the shoulder line of the back.

 Line of the armhole of the back. From. point D down vertically to defer 1/2 of the line AB and place a point I. From point W to the left along an inclined line 1.5 cm to postpone This point to connect with point And smooth concave line, as shown in the figure. This line is the armhole of the back.

 Line the middle of the back. The middle line is the vertical line AB.

 The curved neckline of the front. From point b to delay the left horizontal line 1/4 of the HELL and put a point K. From the point of intersection of the line VG with a horizontal line passing through the point E, to postpone down 1 see Obtained point to connect with point To a smooth curve line, which will be the neck.

 Shoulder line of the front. Connect the dots and a straight line.

 Line of the armhole of the front. From point W to postpone the right of the shoulder line 1.5 cm Obtained point to connect with point And a smooth curve line, as shown in the figure.

 Line the middle of the front.The neckline, front extending to the right horizontally into 3 - 4 cm To the same extend a horizontal line BG. Plotting points to connect with a vertical line.

 Line the bottom of the blouse. Line the bottom of the blouse shown in the horizontal line BG, which is connected by a curve with the line of mid front.

Drawing sleeves
 

The drawing of the sleeve (Fig. 31) is very similar to the drawing of sleeve undershirts considering the difference in dimensions.

The drawing of the collar

The drawing of the collar (Fig. 32) it is necessary to draw a rectangle ABGV, where the lines AB and VG is equal to the dimension of the length of the collar, lines AB and BG is the width of the collar.
 

 The first auxiliary line. The line AB is divided in half, and the breaking point denoted by the letter D. From this point draw a vertical line to the intersection with the line BG.

 The second auxiliary line. Line AB be divided in half. The breaking point denoted by the letter E. Then from the point E to the right, draw a horizontal line to the intersection of the line VG. The point of intersection of these construction lines denoted by the letter Z.

 the Line in the middle of the collar. From the point In down -vertical to postpone the 1/3 point of the connecting straight line with the point D.

 the Line of the neck of the collar. From point G up vertically to defer 1/2 of the line AE, this point is denoted by the letter 3. From point D to postpone then 5 cm through the middle of the collar and to put a point I. Connect the point And point 3 smooth concave line, which must pass through point J. This line will be the neckline of the collar.

Line DI represents the width of the collar of the blouse for children 7 - 12 months. The width of the collar to reduce by 0.5 cm for children from 3 to 7 months. and 1 cm for children up to 3 months.

 Line the outer edge of the collar. Point D to connect with a smooth curve line with points E and 3, touching the horizontal line BG, as shown in the figure.

Cutting and tailoring of blouse with sleeves 

Before you reveal the fabric folded double the grain lines face inward. The pattern front and back of the blouse (Fig. 33) placed the mid-to-fold fabrics, taking into account allowances for seams: 4 - 5cm through the middle of the front; 1.5 cm at the shoulder line; 0.5 cm along the lines of the neck and the armholes of her blouse.
 

The sleeve is placed on a single fabric, as shown, leaving the side sections of the seam 1.5 cm If cuffed sleeves, it is necessary to leave a seam allowance at the bottom 4-5 cm.

All tailoring blouse are the same as vests, with the exception of the processing operations of the shoulder seams and collar.

Cut edges of the front and bottom of the blouse tied or treated with colored piping, which first has to be pritchet around, then remove on the front side and Topstitch along the edge.

The details of the double collar fold right sides inwards and connect on three sides, machine stitch and then turn and stachivaya into the neck of her blouse.

A blouse you can sew on the lining. Lining cut out the pattern top. Upper and lining smatyvay on cross-sections, grind off, leaving a hole through which to turn the blouse on the front side. Nezastroennoe part sew hidden stitches. Slices of overcast stitches along the edge, and then carefully iron out. The edges of the parts, you can stitch the finishing stitch with colored thread.

Neckline can be finished with colored binding with a width of 5 - 7 cm Bake stachivaya in the neck along with the collar. Edge bends and zastrugivajut bakey, closing the line of vrachevanie collar.

The angles of the collar can be decorated with embroidery.

The blouse buttons in the middle of the front buttons or tie ribbons.
 

Such a jacket can easily make for a child 1 - 2 years (Fig. 34), adding 4 cm to the measurements listed above.

BRA
 

The bra consists of a front and back and fastens from the back (Fig. 35). The drawing of the pattern front and back perform within the rectangle formed by dimensions.

Measure, designed for children 1 year, as follows: length 22 cm, width 34 cm

Drawing bra
 

Drawing patterns of bra (Fig. 36) do like drawing sweaters, but with some changes.

Line the middle of the front remains a vertical line VG (see Fig. 30), which is the edge of the front, because this bra fastens in the back.

Right in the middle of the neck on the back, the equity is binding. On the right side of the borders should sweep away the hinge on the left side of the borders to sew on buttons.

To waist additionally be tack, then Topstitch transverse bake width of not more than 2 - 3 cm.

Cutting and sewing of bra

Cutting fabric folded in half in the joint direction of the face inward. Pattern the middle of the front is placed on fold of fabric. Applied to the contours of the parts as shown in Fig. 30, only increasing the allowance for bending the bottom 2 cm Mark the middle of the back, the allowance for bending the bottom 3 to 4 cm, which is folded on the wrong side of the bra and prostrachivajut on the edge of the ACC. Then sew shoulder seams lapped seam on the front side.

The neckline and armholes with bias binding turned to the front of the bra. Waist primetyvajut and pritachivajut transverse bake, which is strapped to the panties and rubber stockings.