PANTIES FOR BOY
 

Pants and shirt are very practical and beautiful clothes for a boy, especially with a good selection of fabric quality and color.
Pants for the boy of preschool age can weave fine cloth, reps, velvet and other fabrics.
Panties can be on straps (Fig. 116) or fastened with buttons which are sewn to the jacket (Fig. 117).
Shirt sewn from the same fabric as the pants, if it is a thin fabric, or from a different fabric (pique, white cloth, Zephyr, silk, etc.). Shirt fabric color should match the fabric of the pants.
For younger children it is recommended as a shirt and pants to choose the fabric, the color is stable when washed.
Drawing pants for children up to 1 year to build in the following standards: the length of the trousers 18 cm; thigh circumference 56 cm
With increasing age of the children at 1 year to measure length, add 2 cm to measure thigh circumference 4 cm
Straps are sewn from two rectangular pieces of cloth, length 4.2 cm, width 2 cm Length and width of straps for children older than 1 year specify, adding each year for the length of 2 cm, width 0.5 cm

Drawing of the front half of the pants
 

In the drawing the front half of the pants should draw a rectangle ABGW (Fig. 118). One side of a rectangle is equal to the length of the pants, and the other 1/3 of the circumference of the hips. The waist line is on the horizontal line AB.
  The bottom line is. From point B up vertically to postpone the cut, equal to 1/4 of the segment BG, and put a point D. Then from the point G to the left horizontally to postpone the cut. equal to 1/4 the distance BG minus 1 cm, and put a point E. Point E and point D to connect with a smooth curve line, which will be the bottom line.
  Line stepper cut. From point G up vertically to postpone the cut, is equal to EG, and to put the point J. Then connecting the point F with the point e of the straight line which is a line of step cut.
  Line a medium slice. From the point In left to delay period equal to 1/10 of the circumference of the hips minus 1 cm, and supply point 3. Then connect point 3 point W concave line, as shown in the figure.
  Line tuck. From point 3 to the left at the waist to postpone the cut is about 1/3 of the cut ONE, and put an end 3₁. From the point 3₁ to hold the dotted vertical line length 4 - 6 cm From point 3₁ to postpone the waist on both sides of the 1 see plotting points connect the straight lines with the bottom point of the dotted line. This follows the line of Darts.
Length and depth of the Darts vary depending on the size of the pants.
  The line side of the slice. It is indicated by the vertical line AD.

The drawing of the rear halves of the pants

The drawing of the rear halves of the pants has many common lines with a drawing of the front, except for the line of waist and line a medium slice. Line tuck remain the same as on the front half of the pants, but they need to extend to the intersection with the waist line.
  Line a medium slice. Point To the left horizontally to delay period equal to half the segment VZ. Through the obtained point to draw a vertical line on it up to postpone 1 cm and put a point of I. Then a point And and point W to connect a straight line, which will line the middle seam.
  The waist line. Connect the point And point And a smooth curve line, as shown in the figure.

Drawing the straps
 

In the drawing, the straps need to draw a rectangle whose sides are equal to the sizes of the straps (Fig. 119).

The cutting of the pants
 

When cutting the pants you need to pay attention to the lobe filament fabric passed through the lateral sections of the front and rear halves of the pants (Fig. 120). Allowance for seams at the waist, stepping to slice and medium slice 1 cm, and for the rest of the slices, 1.5 - 2 cm
If for the manufacture of pants, use a cloth or other woolen thick fabric, which can irritate the child's body, the panties need to do on the lining. The lining is usually cut out from twill, satin, marshmallow or linen fabric. Lining cut out the pattern of the pants. The transverse strands cut out pogoes a width of 4 cm.
The straps are cut out of the main fabric on grain lines with a width of 4 cm. Lining cut out shoulder width of 3.5 cm Width of straps in finished form should be no more than 3 cm of cotton fabric double straps cut out, unlined.

Sewing pants

After cutting the parts smatyvay tucks and folds.
Allowance of 4 cm (3 cm on the clasp and 1 cm for the seam) on the side cut the front halves of the pants folded inside out. The allowance for the zipper on the rear half of the pants pritachivajut lining. The front half of the pants sew along the side cut with back halves from the bottom to the clasp and secured with reverse stitching, the seam Width of 0.7 cm and Then grind off the stepper sections.
The details of the pants is folded at the middle line of the slice, right sides inside and sew to the top of the bow. Half of the allowance for processing of a bow from the right front half of the pants inside out, bend, cut edge bends 0.5 cm, zametyvayut and prostrachivajut. The allowance from the left halves of the pants inside out and folded zastrugivajut on the front side of the line of buttonhole, leaving a hole of length 5 - 6 cm and Then lay in the belt of the finishing line and prostrachivajut side zipper front halves positioning the line at a distance of 0.7 cm from the edge.
To the front halves of the pants along the lines of the folds primetyvajut straps. Pudpots pritachivajut to a side bar of the clasp, folding the front sides of strips. Then pritachivajut pogoes on the upper sections of the front and rear halves together with straps. Cut the edge of podmotsa bends 0.5 cm, zametyvayut and prostrachivajut.
Belt paving finishing line and prostrachivajut sideline zipper front halves, positioning the line at a distance of 0.7 cm from the edge.
Low pants bends on 2 - 2,5 cm If the fabric is cotton, their prostrachivajut on the car, and if wool, sew hidden stitches.
At the ends of the straps spawn loops and a belt, pants stitch buttons.
Ready pants iron.