SHIRT FOR BOY
 

In Fig. 121 the model shirt with zipper in the middle front, round neck and long sleeve cuffs. The front and rear waist laid small folds.
Drawing the main parts of the shirt build in the following standards; shirt length 28 cm; back length to waist 22 cm; back width 20 cm; bust 56 cm; waist circumference 50 cm; neck circumference 20 cm; length long sleeves 22 cm, 12 cm; circumference of the brush 12 cm.
These measurements are designed for children aged 1 year and for children over 1 year of measurements increase depending on age, as mentioned above.
Shirt consists of the back, front, two sleeves, two cuffs and collar.

Drawing back 

When creating drawings of the back on the left side of the paper need to draw a right angle and set the point a (Fig. 122).
  The first auxiliary line. From point A down the vertical to postpone the length of the shirt plus 0.5 cm and put the point B. Through B draw a horizontal line that is the bottom line.
  The second auxiliary line. From point A down the vertical axis to delay period equal to the length of the back to the waist, plus 0.5 cm and put the H-point. A horizontal line drawn through this point will be waist.
  A third auxiliary line. From point A down the vertical to postpone the cut is about 1/3 of the width of the back plus 0.5 cm and put in point B. a Horizontal line drawn through the point, is the line width of the back.
  Line of the neck. From the point A to the right horizontally to postpone the cut, equal to 1/6 of the circumference of the neck, and put an end A. Also from point A down the vertical axis of 0.5 cm to postpone the resulting point is connected to point A smooth concave line, which will be the line of the neck backless.
  The line of the shoulder cut. Point To the right horizontally to delay period equal to half the width of the back, and put the point G. From this point draw a vertical dashed line to the intersection with the upper horizontal line. From the point of intersection of these lines vertically down to postpone 2 cm and place the point D. Connect point A with point D a straight line, then extend it by 1 cm, the end of the line of the shoulder cut denoted by the letter D.
  The line side of the slice. From points To B and the right contours to postpone periods is equal to 1/4 the circumference of the chest. Plotting points to connect with a straight line.
  Line openings. On the line side of the slice from the horizontal line passing through the point V, to postpone cut down equal to the 1/6 of the circumference of the neck, and put an end to E. then Connect the point E with the point A curve line passing through the point G.
  the Line folds. From point N to the right horizontally to postpone the cut, equal to 1/10 of the circumference of the chest, and put an end N. From the point N right to defer 1.5 cm and to the point. The distance between the set points will be the depth of the folds.

Drawing shelves
 

In the drawing the shelves on the right side of the sheet of paper to draw a right angle and put a point A (Fig. 123).
  The auxiliary lines. These lines build the same as on the back, swiping them through the points N and B.
  the curved neckline. From the point A to the left horizontal to postpone the cut, equal to 1/6 of the circumference of the neck plus 0.5 cm and put an end A. Also from point A to defer down the vertical cut is 1/6 of the circumference of the neck plus 1.5 cm Obtained point to connect with point A curve line, which will be the neck.
  Stock shelves in the middle of the front. To lengthen the line of the neck and a horizontal line passing through the point B to the right by 2 cm, plotting points connect with a straight line.
  The line of the shoulder cut. To conduct the dotted line at a distance of 2 cm down from the top horizontal line. Draw an arc with center at point A solution equal to the length of the shoulder back, and at the intersection of the arc with a dotted line to put the point G. the Line AG will be the line of the shoulder cut.
  Line of the side cut of the sleeves. From the points a and B horizontally to the left to delay period equal to 1/4 the circumference of the chest. Plotting points to connect with a straight line.
  Line openings. Point To the left horizontally to delay period equal to half the width of the back plus 0.5 cm and put the point D. Then, on the line side of the slice from the horizontal line DV down to delay period equal to 1/6 of the circumference of the neck and put the point E. Connect points E, D and G of the curve line, which will be the line of openings.
  Line folds. From point N to the left horizontally to postpone the cut, equal to 1/10 of the circumference of the chest, and put an end N. From the point N to defer to the right 1.5 cm and to the point. The distance between the obtained points will be the depth of the folds.
If a shirt with a yoke (see Fig. 117), the contours of the yoke is applied horizontally as on the back and the front (Fig. 124).
Front and back of the shirt is wider than the yoke on the 3 4 see

Drawing sleeves 

Drawing of a sleeve constructed according to the drawing sleeve pajamas.

Cutting and sewing shirts 

Cutting and sewing shirts perform like cutting and tailoring, jackets and pajamas. When cutting the shirt fabric is folded in half face inward. Pattern pieces laid out on fabric at common thread.
Seam following: neck 0.5 cm; armhole 1.5 cm; shoulder cut 2 cm; side cut: 2 cm; at the bottom of the shirt 2 cm; on the side of cut 2 cm; on hem of sleeves 0,5 cm; the collar sections of 0.5 cm At the top part of the sleeve seam to do.
When cutting the shelves, you should leave allowance for processing fasteners 5 - 6 cm in the Middle of the back a running stitch outline. Bag strap cut out without a pattern. They cut out in the shape of a rectangle with one side equal to the slit sleeve plus 2 cm, and the other equal to 3.5 - 4 cm.
Shelves shirts laid out on the table wrong side up, the shoulder cuts from himself and primetyvajut to right (bottom) and the left (upper) strap, if strap cutting. To do this, cut the bar placed right on the cut face to the underside of the front primetyvajut and pritachivajut from the strap seam with the width of 0,5 cm and Then the bar bent at its front side, bend in half, tuck the cut edge of 0.5 cm, namachivajut and scribbled at a distance of 0.1 cm from the bent edges, closing the seam primaqiune.
Left (upper) bar primetyvajut and pritachivajut on the side of the bar, folding her face with the inside out forehand. Then the bar bent on the front side of the shirt, bends its cut edge, primetyvajut and scribbled mysyk. The corners of both straps cut and fill inside.
Smatyvay shoulder seams and sew side front sapacheva back. Sew the side sections of the back side, the front sapacheva. The bottom zametyvayut and zastrugivajut seam bodybu.
Cut a collar put podvorotnya with right sides inside, grind, carve corners, turn out, straighten and spawn edges.
Podvorotni impose face on the front side of the shirt, aligning the middle of podvorotnya with the middle of the back. Then umatyvaet podvorotni in the neck, slightly Posiva mouth and stachivaya on podvorotnya. Cut the cut of a collar bends inwards and scribbled, closing the seam vrachevanie.
Cut the hose strap is applied face down on the wrong side of the sleeve, primetyvajut and pritachivajut on the side of the bar. The bottom bar bent at its front side, bends her low-cut edge and scribbled. The bottom bar covers the upper end of the upper bracket lay mysyk and scribbled.
Sleeves sew the lapped seam. At the bottom of the sleeve lay the folds. Cuff turned, folding cuff and podmenili, right sides inside, turn and straighten the seams.
Pacmangame face added to the underside of the sleeves and pritachivajut. Cut the end of the cuff bends inwards at 0.5 cm and scribbled on the distance of 0.1 cm from the bent edges, closing the seam primaqiune podmenili.
Umatyvaet sleeve into the armhole, aligning the middle of the crown with shoulder seam. On top of the bar in the middle of a cut and overcast loop, and the bottom - sew the buttons.
On the left shelf of a shirt, you can Topstitch the pocket with a monogram or edging.