Sew the bib (Fig. 147) from washable and fast-drying plain or with small bright pattern of the fabric.

The drawing of the pattern of bib you will need the following measurements (in cm):

1. Length of bib — DI (25).

2. Width of bib — Shi (10).

Draw a right angle with the vertex at point C (Fig. 148).

The length of the bib. To mark the length of the bib down from the point we can measure DI and set point S1. From this point to the right side, draw a horizontal line.

Then to the right of the point put 10 cm and place the point C2 from which we drop a perpendicular and on its intersection with a horizontal line put a point C3.

The shoulder line and neck. Down from the point, put 4 cm and place the point C4. To the right of the point, put 2 cm and place the point C5. Plotting points connect with a straight line.

Neck. Down from point C4 put 8 cm and place the point S6. Direct С4С6 divide in half and set point C7. From this point to the right, draw a horizontal line, put 4 cm and place the point C8. Point C6, C8 and C4 connect so as shown in the drawing. Out of the corner СС2С3 draw a bisector, put on it 3.5 cm and set point C9. To the left of point C3 postpone 2 cm and place the point C10. This point, points C9 and C5 connect a smooth line.

The length and width of the belt. To do this, right from the point C1 put 28 cm and place the point C11. This will be the length of the belt. Then down from point C1 put 5 cm and place the point C12. Right from this point draw a horizontal line whose length is equal to the length of the straight С1С11, and set point C13. The resulting point connect point C11. Direct С11С13 divide in half and put a point C14. Right from the point C14 set aside 3 cm and place the point C15. Point C11, C15, C13 connect straight lines.