This apron (Fig. 153) you can wear not only at the dinner table, but when the kid wants to paint or sculpt from clay. Apron will protect your clothes from stubborn stains and save you from unnecessary washings.

To sew this apron, you do not need special skills. The only measurement required for the drawing of patterns is the length of the product, which must be removed from shoulder to desired length. For example, take the length of the product, equal to 46 see

Construction drawing should start with a straight angle with vertex at point A (Fig. 154).

The length of the apron. Down from the point A draw a line equal to the length of the apron (46 cm) and mark point N.

Neck line. To the right of the point And set aside half of the length plus 7 cm and place the point B: AB = DE : 2 + 7 = 30, see

the bottom Line. To the right of the H-point parallel to the line of the neck draw a straight length of 30 cm and place the point H1, which then connect with the point B.

the depth of the neck. The depth of the neck, note the following: down from point B along a straight БН1 set aside 1/4 DI minus 3 cm and place the point G: BG = DI : 4 – 3 = 46 : 4 – 3 = 8,5 see

the Width of the neck. To the left of point B in a straight BA set aside 1/5 of the neckline plus 1 cm and place the point E O = AB : 5 + 1 = 30 : 5 + 1 = 7 see

Points E and G connect a straight line, which then divide into two equal parts and put a point G1. Down from the point G1 in perpendicular to the line. put 1.5 cm and mark the point G2. Through this point from point E to point G guide a smooth line.

Shoulder width of the front apron. To the left of point e, set aside 3 cm and put a dot At the midpoint of the segment U put a point E1, which up set aside 1 cm, put the point E2. Through the point E2 from the point D to point E guide a smooth line as shown in figure 154.

A line one shoulder backless apron. To the right of the point And set aside 3 cm and mark the point J. From the point to the right put another 3 cm and mark the point B. the Segment WW divide in half and set point W1, which set aside up to 1.5 cm, put the point x2. Point W, x2 and connect as shown in the drawing.

Line openings. Down from the point To put 1/2 scoops of DI minus 3 cm and place the point B1: BB1 = EN : 2 — 3 = 46 : 2 — 3 = 20 see

Downward from the point D parallel to the line BB1 draw a straight length of 20 cm and place the point D1. Points D1 and Q1 connect. Then the angle ВВ1Д1 divide in half a straight length of 4 cm and place the point B2, and the angle ДД1В1 — straight length of 3 cm and place the point D2. Point D, D2, B2, connect a smooth line.

Hem. In the middle of the line an put a point A1. This way you will get the lines AA1 and А1Н with a length of 23 cm From point N draw a straight, dividing the angle in half, put into 9 cm and place the point H2. The points A1, H2, H1, connect a smooth line. So the apron was more free and not hamper the movements of the baby, you need to extend the line of the front.

To do this, right from the point D1 put 2 cm and place in a point of H3. This point and the point G connect with a straight line.