When it comes to the holiday 9 th of may, many parents are wondering about buying military uniforms for a child, or at least caps. Many moms know how to sew and the question arises why would a child not to sew the cap to the feast. Just wanted to say that the cap we are going to sew during the Second world war.

First we need to make two patterns. The width of the parts must be equal to half the circumference of your head plus about 1 inch for good obleganie. The second half is the pattern 2, right to carve out a need of fabric folded in half.
 

The first part you need to carve out a quantity of four pieces, item number two need to carve out 2 pieces (don't forget that the pattern is only half of the details).When cutting be sure to mark where the beginning and end of the middle seam (part 1), and the fold line (item number 2).

Now need to sew the two main pairs of parts along the lines of the middle seam, and then be resuturing seams.
 

Next we need to take stitched details and putting face to face, sew them on a curved line between them. After we made them, you need to cut 0.5 inches in the gaps and also make crosscuts, then we rounded out very neat.
 

Then you need to twist details on the front side and at the same attracive seam 0.1 centimeter Next you need to turn on the wrong side of the item and put it in a tube. The next step we take one top and adjusts to face one detail insert. (see photo)
 

Next, at the seam line of the main part to shear off the pins and insert the fold, and now we can sew one half of the insert from the pin to the pin.
 

Now we have to sew the next side of the insert and cut to 0.5 cm allowances, then turn to face and will rasutim. And then again we will turn to the left side.
 

After we need to repeat last operation with the following insert, we now cut through the center of the hole and wrenched on the front side. Let's stretch our cap and working the seams of the panels.
 

Now we need to grin in place of the fold while folding the insert in half with the wrong side. Then we need to stitch the crease so that in the beginning was 0.1 cm further to the center increased to 1.5 cm, then sew going close to the edge. Thus, our place to be in the form of an arc. Then crop and process allowances on the serger.
 

Now it is small, breaklines will tognum main part and will turn the cap on the face and Ataturk. Then you can safely attach a star or even a badge. And that is the miracle we should be able.
 

The work is certainly not easy and you say that it is easier to go and buy in the store, but what if by your work you can make a cap based on their taste, while saving money. Everyone can appreciate the beauty of your work. Good luck in your endeavors.