Materials:

• Ruffle fabric - half meter
• Elastic thread
• The ribbon of the corresponding color - 1.5 meters

walking time: 2 hours

Difficulty level: from beginner to intermediate

techniques Used: Crimping, making loops

Estimated cost: $12

Measurements:

• Measure the child around the widest part of her body (usually belly or buttocks): let's call it O. O1 = O + 7.5 cm
• Measure the length from bust to crotch: let's call it L. L1 = l + 15 cm
• Measure the child around the chest: let's call it S. S1 = s - 7.5 cm

Sewing:

1. Cut a piece of fabric with a ruffle A1 width x length L1
 

2. Now to flash a trailing thread along the top edge O1. To do until then, until corrugated region A1 is equal to S1 the width.
 

3. Sew the sides together, but not reaching 7.5 cm to the end.
 

4. Turn the seam so that it was in the center. Now cut 7.5 cm from the bottom edge in the center. The cutout must be equal to the unsewn part that you left in step above.
 

5. Now to sew the edges and make the shirring stretches the thread in the 3 to 4 range.
 

6. Cut two strips 50 cm in length each. Cut two pieces of fabric with ruffles. 25 cm in length and 7.5 cm in width.
 

7. Sew one end of each tape is 7 cm apart in the center front.
 

8. Now, make two loops of 7 cm from each other in the back. Thread the other ends of the tapes cross in these loops. Try the Romper on the baby and mark the center of the shoulder on the tape.
 

9. Sew the strips of fabric with ruffles to the center these points on the shoulder that you mentioned.
 

10. Put on the baby, tie a knot on the back and smile! Isn't she a cutie?