Traditional summer dress (Fig. 172), is made from cotton fabric, ideal for relaxing in the fresh air. To make the pattern of this dresses, apply the line style for the main pattern. First, the basic pattern on the front, close the dart. Then the shoulder line from the armhole (point P) to the left side put 2 cm and place the point P1 (Fig. 173).


Divide the Breasts Г2Г4 into three equal parts. Thus you get a line Г4Г5 equal to 1/3 of the width of the front. Up from point G5 set aside 3 cm and place the point G6. This point connect the point P1, as shown in the drawing. To the right of the point N put a segment of length Г4Г5 plus 2cm and put the point H1, which then connect with the point G5.


For the expansion side of the dress to the left from the point D1 put 2 cm and mark the point N2. The resulting point connect point G6. The pattern backless contoured lines apply in the same way as the pattern the front.


As a result, you should get the part shown in figure 174. Then apply line style for main pattern sleeves. Apply a line short sleeves by swiping down from the middle of the top part a line length of 15 cm, and put a point Then from the point K draw a line parallel to the hem, and cut it extra long. Then from the middle of the top part to the bottom make a slit the pattern and spread it to the Assembly on 7-8 see


To the cutting of the dress prepare the material length 174 cm and width 75 cm the Pattern on the fabric spread out as shown in figure 175.