You can sew the hat from any light cotton material and decorate it with lace, appliqué or embroidery.

Draw a right angle with vertex at point A (Fig. 152). On the right side of the point And put 48 cm and set point A1. Then down from the point And put 28 cm and place the point A2, which is to the right draw a straight, equal straight AA1, put the point A3. This point connect the point A1.

Down from the point And put 12 cm and place the point A4. From the point A4 draw a horizontal line and the point of intersection with a straight AA3 place A5. Direct AA1 divide in half and put a point A6, which is down swipe perpendicular, and the point of intersection with the horizontal lines indicate the A7 and A8.

Then down from point A8 set aside 3 cm and place the point of the A9. From the received point to the left and right put at 4.5 cm and dot a10 and A11. Right and left from the point A7 set aside 2.5 cm, plotting points designate A12 and A13.

Points A11, A13, A12 and a10 connect as shown in the drawing. Points A12 and A13 draw straight, dividing the angles in half, put them at the 1 cm mark and O and O1. These points connect smooth lines. Up from point A6 set aside 6 cm and place the point A14. To the right from point A and to the left from point A1 set aside for 8 cm, put points O3 and O2. Up from point A4 put 5 cm and place the point A15. Then right put 2 cm and place the point A16. Plotting points connect a straight line.

Now point upward from the A5 set aside 5 cm and place the point A17. Then to the left from point A5 put 2 cm and place the point A18. Point A17 and A18 connect the same as and points A15 and A16. Points A11, A18, A17, O2, A14, O3, A15, A16, a10, connect as shown in the drawing.