At connection of details of clothing on the sanding machines it should be remembered that the promotion of tissue under the foot of the machine is uneven and depends on the type of tissue and the pressure exerted on the foot. The top fabric under the presser foot of the machine is subjected to friction on the surface of the legs and delays in the promotion. To reduce the friction surface of the foot polished. The bottom fabric is easy to promote along the lines. Therefore, when bridging the two parts of the sewing machine lower fabric pokazyvaetsya; this should be considered in the processing of clothes.

When you run straight lines of the fabric are placed under the foot, which is then lowered; a left hand left foot, right in front of her. At the end of the line is fixed. 

Lines and polylines are performing parallel to the edge of the part or on the planned chalk line to the first corner. Then slow down the running of the machine and in the corner of a broken line, the car is stopped, leaving the needle in the fabric (in the lower position). Item (product), turn on the needle according to the chalk line or corner of the part, lifting the presser foot of the machine.

Oval ways of doing the slow speed of the machine smoothly and evenly rotating part (product) strictly on the chalk line or parallel to the edge of the part. 

When bridging two tissue sections using various techniques, depending on the set conditions, for example: 

 without landing tissue , his right hand holding a few cloth bottom, and the left hand to help move the upper fabric; in the oblique easily stretchable tissue slices evenly pokazyvaut throughout the length of the seam; 

 from the landing of the lower fabric - left hand a few hold the upper fabric, and the fingers of the right hand evenly spread the fit of the bottom of the fabric and help to promote the under the presser foot of the machine; 

 with the landing of the upper fabric , his right hand holding a few cloth bottom, the fingers of the left hand evenly spread the fit of the upper fabric and help to promote the under the machine foot; presser foot pressure in this case must be weakened somewhat.