Coats and various jackets with extra warm padding are wide-spread in the product range of outerwear. The processing of such products is the same as summer, spring and autumn coat. But there are some features - additional inside sections of podborov and a slightly different connection method of lining products for the side edges and the neckline. 

 The processing of the internal sections of podborov. In the manufacture of men's winter and demi-season coat made of thick fabrics as well as coats with extra warm lining and the coat is lined to the waist, the inner sections of podborov edging stripe lining fabric width 5 - 5.5 cm After the binding strips pritachivajut to podborta at a distance of 3.5 - 4 cm from the edges of podborov. 

On the front side of podborov mold mark out of the loop and overcast stitch them on the machine. Loops can be made from ribbon or strips of cloth (like a hanger) and pritchet them to podborta when grinding with strips of lining fabric.

 The connection of the lining with piped podborany products. Treated lining check and clarify on the product. Thus the side edges of the lining should overlap the inner edge of podborov 6 - 6.5 cm. On the bottom of the lining is cut with an allowance for overlap and seam width. After clarification of the lining pritachivajut to the bottom of the garment, not reaching podborov 8 - 10 cm, and then side sections of the lining are placed under the inner edge of podborov and primetyvajut manually. Podborta scribbled on the lining in the seam protecive edging strips. 

 Processing insulated strip. Heat-insulation strip in the coats and jackets are made from two layers of lining with cotton batting, foam rubber or special heat-resistant fabrics (baize, flannel, etc.). A warming pad can be with sleeves and sleeveless, short (15 - 20 cm below the waist) or long (5 - 10 cm shorter). Sleeve gaskets are manufactured by 4 - 5 cm shorter than the sleeves of the product.

The details of the non-core lining from lining fabric lay wadding or batting. Flooring on top of it is cotton gauze. Detail strip wasteheat equity lines with distance: in the strip with the wool 5 - 6 cm, pad with wadding 10 cm After wystawiania clarify details on the patterns and connect along the side and shoulder sections of joints with a width of 1 cm Excess Vata from the joints is removed. 

On warming the gasket put the lining from the main fabric and grind in a circle around the hem, side cuts and the neckline seam width 0.7 cm In the corners seams of the lining cut.

The side seams of the main lining connects with the side seams of the insulation strips, after which the lining turn through the armhole on the front side and scribbled on the distance of 0.3 - 0.4 cm from the edges, forming the edge of the main lining. 

The openings strip sleeveless edging. At the side edges of the strip sew buttons in accordance with the placement of the hinges on podborta. One additional button sewn in the middle of the neck backless.