Preparing parts for sewing is to test their quality, refining the size and shape, the markings of the locations of Darts, pockets, loops, numbering and selection. 

When controlling the quality of cut check the cut parts according to the patterns of overlay test patterns on the upper and lower parts in the pack. The basic details of the top fabrics high list groups check pattern overlay on each detail separately; in a cut, of cotton, rubberized, water-repellent fabrics are checking only the upper and the lower part of the bundle, not transferring the rest.

Correctly cut parts when applied to the mold should close the applied line of permissible deviations or out over the edge of the patterns by an amount not exceeding these deviations: the armhole, the neckline, top part of sleeves and shoulder cut - 0.1 cm; the lateral side and the slices of 0.2 cm; at the bottom of the products - 0.3 cm. 

If the items obojeni or cropped, they are transferred to smaller size; if the warp threads in the parts does not exceed the permissible deviation, correct them, keeping the size of the part, or transferred to smaller size; in the presence of excess tissue contours precise details on the patterns.

Then check the placement of the control nasechek that determine the point of alignment of the sections during the bonding. The excess tissue cut in the stack of parts with a height of 5 cm mobile Electrotechnology machine or manually with a knife, while making the missing notch.

The location of the tucks, folds, pockets, bending lines etc. are marked with chalk on the details of the products of woolen fabrics in the support patterns for each part separately. Continuous tuck, one-sided and inverted pleats mark out three lines: the first fold line, second - line grinding, and the third cross - the ends of the tucks and folds. 

The location of the pockets are scheduled as follows: invoice - one line at the top edge and two at the sides; Welt - one along and two across.

On the details of the products cotton fabrics, and details of lining the ends of the Darts on the pockets and mark a hole punch, awl or chalk as well as on the details of woolen fabrics. For details of pile fabrics after the marking lines on them lay the lines on the machine or by hand. On the details of the plush threads are scheduled only those lines that do to the front of the fabric.

Valves, pockets, leaves adjust on the fabric simultaneously with the layout of the pockets on the main parts.

Details are numbered to ensure completeness in the process. For this sew coupons for all the major details, and minor - only at the top and bottom parts in the stack. Coupons placed on the front side so that they were visible after machining at large - at a distance of 10 - 15 cm from the slices, on a small is in the middle parts. 

On the details of lining rooms put down the chalk or pencil. 

Completeness of detail check in accordance with the list and quantity specified in the technical specifications for the product. At the same time complement the details of the top, lining and butt.