PROCESSING PRODUCTS FROM FAUX FUR, LINED WITH FOAM 

Edge on cross-sections of the openings are laid only in products with Raglan sleeves or proregion. 

Tuck grind, enclosing the ends of the pieces of calico. 

Pockets treated without dolevikov. For machining edges of pockets are encouraged to apply finishing materials: pavina, nylon, drape, etc. 

In the processing of paper use pads from calico, calico. 

Loops on the side can be obecnie or mounted. When processing oblachnykh loops under them put a strip of calico or calico.

Products details connect bridging seams with a width of 1.0 cm. Seams spread in different directions, not pritoria. 

Processed collar connected to the neck of the product bridging the seam width 1.0 cm, putting it between the uppers and lining products (Fig. 84). 

Buttons for the zipper sew with Popovica or amplifier. 

The lining connected with a product on sanding the car around. 

The finished product does not curdle. 

PROCESSING of PRODUCTS made of ARTIFICIAL LEATHER DUPLICATE WITH the JERSEY

 the cut. In the side, at the bottom of the shelves and the neck lay the adhesive edge (band-aid). The armhole shelves and back Podkayne lay the strips of calico or calico 3 cm wide and 

 pocketing. Pockets items should be treated on the burlap. 

The ends of the pockets is fixed from the inside on the sanding machine.

 Processing slots. To protect the splines from tension on its edges glued strips glued edges or sew a strip of calico, calico. 

 Connection details. Side, shoulder seams, the details of the sleeves connect nastronie seams. Bridging the seam width 1.0 cm, nastrojowo - 0,2 see the Front and lower seams of the sleeves are not scribbled. 

 Treatment of the lower edges of sleeves and products. Bottom of sleeves and of the product treated with bodybu seam open cut. 

 The connection of the collar with the neck. Collar connected to the neck of the product in two ways: the first is bridging the seam width 1.0 cm, putting the collar between the garment and lining products (see Fig. 84), the second patch seam with a machine zigzag stitching. To do this, the neck on the front side of the product put a line of felling. Initially scribbled lower collar overlay, seam and open cut. After protecive lining scribbled the upper collar with hem of the inside slice at 1.0 cm Distance from the bent edge to a line 0.2 cm (Fig. 85).

PROCESSING PRODUCTS FROM WOOL KNITTED FABRIC doubled WITH FOAM rubber AND KNITTED NYLON sheet 

 Processing sections. Products in the unlined details link on the sanding machine and slicers overcast on a special machine or connect to smachiwausa-obmanyvala or overcasting machines. 

At the armholes, back and shelves in products with vtachnoy sleeve at a distance of 0.5 - 0.6 cm from the slices are laid edge length of 10 cm with a little tension. In products with Raglan sleeves edge pave from the edge of the neck to the second notch. 

 Treatment tucks. Continuous tuck grind by placing strips of fabric from calico, calico, and then rautureau. 

 Pocketing. Pockets treated without dolevikov on sackcloth. Products in the unlined bottom part of the burlap cut out of base material. In this case, the slices burlap overcast. 

 Processing of side edges. The side strip is cut out in the form of podborta from calico. Side edges will be turned on a sanding machine. Loops for clasps are processed by a special machine. Buttons are sewn simultaneously with podborany. 

 The connection of the collar with the product. The collar is connected to the product in two ways: first in products unlined - stachivaya the lower collar to the neck seam rautureau; sew upper collar with podborany for rascal, in the area between podborany pritachivajut obtachku, seams rautureau; the second - in products on the lining - sections of the collar and the bottom collar sew a seam with a width of 0.5 cm, the finished collar is put between the device neck and podborany and stachivaya it seam width 1.0 cm; lining at neckline backless pritachivajut in the line of vrachevanie collar.

Ironing products produce a wetted pad at a temperature of 140 - 150' C. 

PROCESSING PRODUCTS FROM QUILTED three-layer CLOTHS

For making jackets, coats, and overcoats women's, men's and children's used a three-layer fabric (top and lining made of synthetic fabrics, padding made of synthetic fleece or batting), quilted on multi-needle machine. Products of these cloths sew unlined. 

The connection parts produce bridging, or patch nestrashnye with closed sections, joints with a simultaneous or subsequent eyelet sections.

Continuous tuck grind, and then scribbled. If the Darts split, after grinding overcast slices, then tuck scribbled. 

While the treatment of boundary areas of the parts (side, bottom, shelves, leaves, patch pockets) strip or edge is not used. 

For the machining of pockets, the outer burlap cut from quilted fabric, cut burlap or overcast edging. Welt pockets treated burlap (without dolevikov). 

Sleeve stachivaya in closed or open armholes with simultaneous or subsequent eyelet sections. Sections can be turned over.

Processing of side cuts are performed grinding podborany or ACC side of the edge. The inner sections of podborov grind to, grinding of the side sections of the shelves. If the clasp of the products on the zipper, when the grinding of the sides between the sections of shelves and podborov put the braid lightning, then podborta bent towards the inside of the product and reinforce the finishing line. When the clasp idalia zip and side edges can be processed without podborov. In this case, the shelf provide an allowance for ACC. The side sections of shelves overcast, bends and scribbled on the braid and the zipper.If the loop is hanging (cord, tape), they scribbled on the side sections of shelves on the markup.

Collars with knit trim, faux fur handle obecnym seam. Edging from the top part of the collar is fixed to the finishing line. If the collar without finishing, it is processed from one piece. The collar overcast at the ends and go. The angles of the grind off collar and twist, placing the seam on two sides. Bent sections of ledges and departure of the collar scribbled the finishing line. Collar stachivaya, putting it between the device neck and podborany. In the area between the shoulder seams and finishing the collar bends of 0.7 - 1.0 cm and scribbled.Single collar stachivaya on smachiwausa-overlock machine.

Bottom of sleeves and products overcast, and then zastrugivajut itagiba the seam, positioning the line of 0.3-0.5 cm from the serged slice. 

PROCESSING of articles of two-layer CLOTHING MATERIAL "PALAKS" 

Their double-layered clothing material "palaks" produce jackets, women's and men's coats and overcoats. All products from Plaksa treated lining insulated with a lining of cotton batting, synthetic fleece, faux fur. Properties plaxa determining the characteristics of processed products.

Details connect to sanding machines (462 CL. PMZ, PMZ CL. 262, 597 CL. OSLM, 22-A CL. PMZ) with the simultaneous lubrication along the stitching on both sides of the parts 50% solution of silicone emulsion. Presser foot is replaced by the role of the press or a Teflon foot. Side, shoulder, the middle sections of the back link bridging, lapped tongue or overlaid with a shut cut seams.

Tuck a continuous grind and scribbled. Split tuck is treated with overlaid seam with a shut cut, belt, strap, PATA, belt loops - open cut. Welt pockets treated without dolevikov on sackcloth. The leaflets, the valves are made without gaskets. Valances, piping scribbled on the burlap without bending sections. 

The side strip made of nonwoven fabric, calico is only used on the lapels and side edges.

Collars are treated without spacers. If the stand is detachable, it pritachivajut, seam primaqiune rasstraivaet. After grinding and screwing out the front of the collar scribbled on the ledges and flying at a distance of 0.1 - 0.15 cm from the seam grinding. 

Sleeve stachivaya the closed or the open armhole. Bottom of sleeves zastrugivajut seam itagiba with open or closed cut (if tissue but difficult to spill) by placing a bent edge of the lining sleeves. 

The side sections of the lining and insulation strips connect at the same time. Side sections connecting nastraivanie at a distance of 0.5 cm from the slices.

The lining on the bottom of the product treated unfastened or banded. If the lining is unfastened, the bottom of the product zastrugivajut seam itagiba the open cut. If the lining is stitched, stitch bodybu with a shut cut by placing a bent edge of the lining product.