Banded cuffs from the main fabric. Banded cuffs can be without zipper and with zipper. 

When processing the cuffs pull on them from the inside out is put on the lines of strip and combined with cuffs on the blindstitch machine or pressing, if the strip of fabric with an adhesive coating.

When processing the cuffs with clasp from one end of the cuff is treated with a loop. Grind the ends of the cuff seam with the width of 0.5 cm, bending of the cuff along the middle part and not reaching the ends 0.7 - 1 cm Cuff turn corners and straighten them spawn with the formation of Kant's width 0.1 cm Cuff priorivet (Fig. 60), and overcast loop.

The cuffs connected to the sleeves after processing of the front seams (Fig. 60, b) in the following way. At the bottom of sleeves processed pleats or Assembly. Cuff pritachivajut to the bottom sleeve seam 1 cm wide, spreading the folds or Assembly in accordance with nadechka. Bead perform from the side of the sleeves. When participarii cuffs with zipper sleeve release over the ends of the cuff 1 cm for processing. After primaqiune grind off the cuffs of the elbow sections, continuing the stitching on the sides of the cuffs if the cuffs or no cuffs reaching up to 10 - 12 cm, if they clasp.

Elbow seams of sleeves and side seams of the cuffs without clasps rautureau, cuffs, bend towards the inside sleeves, cuffs combining slices and zametyvayut them on a special machine, and then priorivet. Nesmachnyi sections elbow sections of iron towards the inside of the sleeves. 

 Fold-over cuffs from the main fabric. When processing turn-down cuffs made of thin fabrics to increase the resistance used strips of calico or calico. Strip primetyvajut from the inside out on a special machine or stick, positioning it so that the bottom edge coincides with the crest line of the cuff, and defended the upper 1 - 1.5 cm from the cut edge of the cuff. Top, and in some models the sides of the cuffs, grind the lining seam with a width of 0,5 - 0,7 see

The lining of the cuffs folded to the side of the back, forming the edge of the main fabric. The end of the cuff correct and spawn on a special machine, finishing line at a distance of 0.5 - 1.0 cm from the sides. Cuff priorivet, deploy, and grind off the side sections of the lining and cuff seam width 0.7 cm, aligning the joints grinding. Seams stitching cuffs rautureau. 

If the model on the edge of the cuff stitch finishing not, to secure the edging and shape of the edges of the lining sew the cuff from the inside details on the blindstitch machine is at a distance of 1 - 1.5 cm from the seam grinding.

Lining with cuffs, you can connect the glue method. For this adhesive are laid from the inside of the cuff before stitching the sides. The edges of the cuffs scribbled on the model. 

To connect fold-over cuffs with sleeves to wear them on the sleeves and lining of the cuffs pritachivajut seam width 0.7 cm to the lower sections of the sleeves from the sleeves (Fig. 61). Allowances on ACC bottom cuffs bend along the line marking towards the inside of the sleeves and zametyvayut on a special machine at a distance of 1 - 1.5 cm from the fold, and then priorivet.

To fasten their cuffs folded, and sew the lining to the sleeves manually or pritachivajut on sanding machine in two or three places stitch length 4 - 5 cm 

 Fur cuff, and the cuff of the main fabric are stitched and folded. 

 Treatment banded cuffs described above. Feature processing banded cuffs with fur trim is the connection of the strips of fur to the cuff of the main fabric. After primitivne strip on the front side of the cuff mark the line blend fur stripes. The fur cuff is placed on the layout lines down pile and scribbled them on a distance of 0.5 cm from the edge. Fur round about lines and primetyvajut in the middle of the hand stitches. The upper sections fur stripes scribbled on a machine zigzag stitching (Fig. 60). 

 Treatment fold-over cuffs consists of the following. If the fur has a thin membrane, to stabilize the cuffs used strips of linen or cotton. The gasket applied to the underside of the lining, perepuska it on 0,3 - 0,5 cm in the upper sections, and pritachivajut on the distance of 1.5 cm from the edge. Fur cuff put on lining, the edge strips are bent and grind seam cuff width 0.5 cm the Cuffs are folded, placing the stitches turning to the side strip, and scribbled them on the front side of the lining with the gasket at a distance of 0.2 cm from the seam grinding.Then, the cuffs and the lining sew the sides seam of 0.5 - 0.7 cm and bend along the cuffs, forming edge with a width of 0.5 - 1 cm to pin the edges, sew the lining to the cuffs by hand or machine blind stitch the side lining.

The bottom edge of lining bends of 0.7 - 1 cm towards the wrong side and sew to the cuff. 

To connect with fur fold-over cuff sleeves cuffs put in the treated sleeves and pritachivajut to the bent bottom edges of the sleeves for sanding or making the car. Folded cuff on the front side of the sleeves and sew them in two or three places manual concealed stitches at a distance of 4 - 5 cm from the top edges.