Variety of MODELS 

a Number of models simultaneously produced in sectional mnogoseriynom,the flow depends on its power. In the sectional flows of average power simultaneously, it is possible to produce products of six styles, in streams b ol his second power - up to 10 - 12 styles. 

Models outerwear on the complexity of processing can be divided into three main groups. 

The first group includes models that dramatically differ from one another in their design, for example, products with set-in sleeves and Raglan sleeves; with collar and without collar etc.

The second group includes the products in which only some of the main parts and components are treated differently. 

The third group includes products with different parts that can be processed before the primary process; for example, models with patch and Welt pockets; back, with straps and without them, etc. 

At manufacturing of products of the first group and the organization of flows in the picking process operations sometimes work operations with significant deviations at the time of the average beat flow. It is the same, but to a lesser extent, applies to products of the second group.

In the manufacture of one product flow of the third group can be partially or entirely eliminate the differences between the models for time consumption by processing parts that are typical for each style, before the main process. 

If mnogoseriynom stream or sequentially cyclical-cyclical run we need to produce products at the same time four to six models, as described above, to allocate products to groups so that each group had models of different complexity of the processing, but is similar in shape cut, sequence and processing methods.

The models planned for the month, quarter, year, make up the schedule for running the models, which establish the sequence of replacement products of one group of models the products of another group. 

The CHOICE of TREATMENT METHODS 

in the design flow in the garment factories for each model are the technical descriptions, which indicate the processing methods of templates for making samples and technical requirements.

The choice of processing methods is of great importance for designing efficient processes. You need to choose treatment techniques that would ensure high quality products at minimum cost processing time, would meet requirements of modern technologies, techniques, advanced methods of work. Processing methods for the same nodes of all models should be the same.

Methods of treatment as well as in odnoosnykh flows, set in the experimental shop of the factory according to standard methods of garment manufacturing, developed TSNIISHP, given the sample and the technical description of the model submitted by the modeling organization. 'Fabricated samples discuss the technical and engineering employees and craftsmen sewing shop. When choosing methods of treatment it is necessary to consider the properties of fabrics which will be produced and the equipment used.