Before joining the bodice to the skirt the skirt must be processed Darts, pleats, pockets and connected part of the skirt, and the bodice - processed Darts, clasp, connected side and shoulder seams, treated and connected to the neck collar. 

The bodice to the skirt connecting bridging or patch seam.

When connecting bridging seamed bodice puts in a skirt and smatyvay manual straight stitches with a length of 2 - 3 cm or shear pins, aligning the middle of the shelves, backless bodice and skirt, side seams and Darts etc. the Bodice to the skirt pritachivajut two lines or only one by putting edges for protection of the seam from stretching. Joint width-side skirts - 1.5 cm Thread smachivaniya removed.

When connecting a patch, seam the bottom of the bodice with the front side obmeleet mold, bend inside the intended line and zametyvayut straight stitches with a length of 1.5 - 2.0 cm To the skirt outline a line connecting the bodice to the skirt. The bodice is applied to the skirt, aligning the bent edge from the intended line and scribbled, using a special foot. 

Dresses of wool and silk fabrics primetyvajut the bodice to the skirt straight stitches with a length of 1.0 - 1.5 cm, and then scribbled.

In the same product, you can connect the bodice to the skirt bridging and patch seam. In this case the bodice to the skirt sew, and then the bodice bent and scribbled. The width of the felling of the bodice is determined by the model.