Warming the gasket connect with the product. through the side sections, the neckline, armholes, side seams and hem. In products with unfastened lining insulation strip on the bottom does not connect. Connection is possible with manual and machine methods. 

The sequence of connection of an insulation strip products may be different depending on whether connected or not connected to the side sections in the gasket. 

In both cases the first operation is to check the gaskets on the size of the product.

If the side sections of the insulating strip Stacey, the gasket applied to the underside of the product so that it overlaps the inner sections of podborov 2.5 cm, shoulder seams - 1 cm, and side seams - 2 cm, and put the control chalk line on side sections of the insulating strip and the side strip. In products with slit strip is cut back on the length of the slots. On a pad located on the table side seams down, put the product seamy side down. Shelves are bent in the direction of the back and side seams of the product combined with the side seams of the lining.The side seams tie in to a universal machine or machine blind stitch, ending stitching at the top at a distance of 8 - 10 cm to the armhole, below - at a distance of 15 - 20cm below the waist line. Products in the free form or the flared connection of the side seams end at the level of the waist line. In the jackets, and products for toddlers and preschool age strip along the side seams do not sew.

Then attach side edges of the insulation strip to side strip on the blindstitch machine or sanding machine (in children's products, where the side strip does not reach the armholes) with lines on. a distance of 2 - 3 cm slices, Posiva strip at the chest and aligning the reference mark. The inner sections of the side strip is attached to the insulating strip for sanding machine or machine zigzag stitching.

In products with slit -insulated strip sewn to strips the splines on the blindstitch machine. The gasket primetyvajut, and then the excess is trimmed at neckline, armholes and back, in the corners and the sides of the slot and on the bottom. 

The gasket on the bottom of the garment are cut, leaving a seam allowance of 1 - 1.5 cm over the edge of the seam allowance on ACC bottom in products with pricechannel on the bottom of the lining and 2 - 3 cm above the bottom edge - in products with unfastened lining. 

Insulation strip attached to the seam vrachevanie the bottom of the collar on the sanding machine after grinding of the shoulder sections of the strip.

The openings for insulating strip attached to the special marking machine 

If the side sections of the insulating strip is not Stacey, the connection strip with the top products start with the side sections. 

The gasket is applied to the side strip and join her on the blindstitch machine (Fig. 64, a). Then sew the side and shoulder seams of the strips of the backrest (Fig. 64, b). Further processing is the same as previously described.

Connecting the side sections of the insulation strip can be combined with pritachivajut slices lining on a special machine 260 In this class. the case on the platform of the car put side end face down. The product itself is placed in a special box. The inner side of the cut strip is placed on the second part of the platform of the car. On top of the side strips put insulation lining, then the lining wrong side down. After laying all the parts the machine turns on and connects one line side and insulated strip lining.