TREATMENT LINING 

Lining treated in this manner. 

First treated with a coat hanger. A strip of cloth that bends on both sides of 0.7 cm, stacking one bent edge to the other so that the width of the hangers in finished form was equal to 0.7, see the Line perform in the middle. The hanger can be cut from the special.braid.

To handle proderzhalas strip of lining fabric folded in half along the part and grind seam width 0.7 - 1.0 cm. Proderzhaly turn, straightening the seam, and fold it lengthwise in half. The inflection of the details decorated in the form of a triangle. The end of oldergames fixed transverse lines, forming a loop for the buttons. Tie feature across oldergames: the first at the base of the triangle, the second - on distance of 1,5 - 2 cm from the first. The length of the clips is 0,5 - 0,7 cm.

Treatment lining start with primaqiune wedges or extensions to the basic details from the supers seam width 1.0 cm. 

tuck Process, grinding off them from the inside out, or scribbled on a machine with zig-zag stitching from the front side. 

On the shelves are treated pockets (see here).

On the lining of the back middle seam perform. If the lining of the product primatives on the bottom for screwing out of the product on the front side of the middle seam of the back left destacando. Then grind off the shoulder, side sections, front and elbow sections of the sleeves. The middle of the front or elbow slicers leave Nesmachnyi on the site length 15 - 18 cm 

For the cut throat pritachivajut hanger triple reverse stitching. 

Lining sleeveless stachivaya in the armhole lining products. 

Width of all seams 1 cm.

In lining no internal pockets at a distance of 2 - 2.5 cm from the top edge of the neck in the middle of the back scribbled a factory stamp. 

The finished lining produisait. 

PROCESSING of INSULATING PADS AND SHOULDER PADS 

 a pad of wadding is manufactured in separate parts: two layers - at the top (to the hips in products for adults and short on 4 - 5 cm to the bottom edges in children's products - to 30-gauge), one layer at the bottom.

The wadding layers are joined to each other for sanding or special machines in the back at the shoulder and side sections, in the shelves, at the side sections. 

Side and shoulder seams connect to the car with a knife to the connection pads with the product or during the connection. 

 The upper shoulder on the masonry (Fig. 63, a) is used to give a more stable and regular shape of the shoulder portion of the product. In the products of different design the height of the shoulder pads can vary, sometimes products, process without them.

Treatment of the shoulder pads start with the fact that between the two parts, cut from linen fabric, lay a layer of cotton wool. Outside edge thickness of a layer of wool 0,8 - 1,0 cm, to the oval edge thickness negated. Stitch the shoulder pads perform on a machine zigzag stitch from the bottom layer: the first line a parallel to the outer edge at a distance of 0.5 cm from it, the others have oval; distance between lines of 1.0, see overlays on top of the back side are placed pieces of soft fabric and glued them to the press or pritachivajut one line on the machine.Priduzivanja on a special press or iron linings attach the appropriate form (Fig. 63, b).

Manufacturer of shoulder pads made of polyurethane foam (foam rubber) consists of cutting out parts and subsequent pressing of the edges of the oval plates on the press with a special pillow. 

 Podomatic (Fig. 63) is used for a smooth transition of the shoulder area of the product to the sleeve. Podomatic cut out the batting at an angle of 45' to the quilting lines in the form of strips, with a width of 4 cm 

, the CONNECTION of the SIDE PADS, SHOULDER PADS AND PODOSINNIKOV WITH the PRODUCT 

 Side gasket sew to allowances of seams vrachevanie sleeves and collar striping or sanding machine, if it is not connected. with them earlier.

 Shoulder pads are placed on the sides of the product so that the middle is flush with the shoulder seam, and the outer sections of the lining were made for the level cuts of the sleeves and the armholes on 1 see the Shoulder pads connect with the seam vrachevanie sleeveless from sleeves at a distance of 0.1 cm from the seam vrachevanie marking on the machine or manual marking stitches 1.5 cm long, capturing the top layer of the lining together with cotton. The beginning and end of lines is fixed. The inner edges of the shoulder pads sewn to the side strip above the shoulder joints of 5 - 6 manual slanted stitches with a length of 1.0 see 

 Podomatic place by sleeves so that their mean length is aligned with the shoulder seam. One of the longitudinal sections combine with the slices seam vrachevanie sleeves in armhole. Podomatic sewn to the seams of vrachevanie sleeveless special marking on the car with the top shoulder pads.