TREATMENT of the BOARDS 

IN women's and children's dresses bead decorated with podborany, the inner sections which are treated depending on the type of fabrics. 

In woolen and silk fabrics are easily peeling off the inner sections of podborov overcast on a special machine, then bends at 0.5 - 0.7 cm and zastrugivajut 0.1 - 0.2 cm from the bent edge. 

In dresses of fine silk fabrics, the inner sections of podborov zastrugivajut seam itagiba with a shut cut, using a special foot (the switch).

In dresses of wool fabrics with chemical fibers in the inner sections of podborov overcast. The frequency of serging is determined according to GOST 12807 - 67 "sewing". 

Dresses of cotton fabrics allowed the inner sections of podborov to zastrochit on bodybu seam open-cut or Topstitch on the shelves, turning the slices at 0.5 - 1.0 cm.

Processed podborta put on the shelves and namachivajut planting in the corners of the lapels (products with flaps) and plots the location of the hinges and buttons. The size of the landing is determined by the appearance of the treated tissue. Dresses of woolen fabrics fit podborov sativum. Grind the side from the shelves with a seam width of 0,5 - 0,7 cm Seam grinding in the corners trimmed, and the dresses of silk easy to crumbling tissues overcast on a special machine. Bart turned on the front side, spawn with the formation of Kant with a width of 0.1 - 0.2 cm and priorivet.

In the products of woolen and silk fabrics, the inner edge of podborov hidden stitches to attach the main fabric. 

When at the edge of the Board treated oblachnykh or serged loops inner edge of podborov in the locations of the loops and buttons are not assigned. 

Podbot over obraznymi loops are cut (with the corners at the ends), cut podborta tuck inside and sew hidden stitches. 

TREATMENT OF SHOULDER AND SIDE SECTIONS

Shelves and back are folded face inward, shoulder seams smatyvay straight stitches with a length of 1.0 cm from the back, making the fit of the back in the middle part of the seam. The size of the landing depends on the type of shape (sutula, parageusia, etc.) and properties of the treated fabrics. In the presence of the shoulder Darts on the shoulder sections of the shelves and back are equal, smatyvay and grind from the side of the shelves with a seam width of 1.25 cm For protection of the seam from stretching performed in two lines or below the line put the edge and scribble at a distance of 0.1 - 0.2 cm from the inner edge.Thread smachivaniya removed, seams rautureau.

In dresses of wool and silk fabrics, shoulder seams sew on smachiwausa-overlock machine, placing a line edge. Dresses of cotton and linen fabrics shoulder seams sew on smachiwausa-overlock machine with additional stitching on the sanding machine. Iron the seams in the back side. The side sections of the shelves and back fold inside out and sew from the side seam of the shelves with a width of 1.25 cm, the stitches rautureau.

In dresses of wool, silk and cotton fabrics, the side sections of the sew on smachiwausa-overlock machines, seams or iron are bent in the direction of the shelves.