On-seam pockets can be treated with leaves and without them, with the finishing line. 

  Treatment of pockets with leaflets in the seams and folds. To handle this pocket (Fig. 35,a) requires the following details: the piece of base material or finishing cloth (depending on model) - one, pocket lining of base material is one (of two parts) . The leaf is processed, as indicated in chap 1, § 9. On a piece of paper plan a line of primaqiune. On parts of the main part of nasecki or chalk lines outline the location of the pocket.
The leaf impose face on the front side of the top part, combining edge leaves with nasecki at the edge of the part so that sections of the leaflet located in the direction of the slices for the main part, and pritachivajut on the planned line, in the individual production - with the advanced primitivna. The width of the seam from the base part should be not less than 1 - 1.5 cm Then on the piece of paper applied one-part lining pocket face down, releasing the top edge of the lining for top edge of leaves 1 - 1.5 cm, and pritachivajut in placeprimaqiune leaves or departing from it by 0.1 cm Width seam with side lining 1 cm (Fig. 35,b).
In mass production the leaf is applied on the sweeps on the upper part of the main part face down positioning sections of the paper in the direction of slices main part; the leaf is applied to the lining face down and pritachivajut one line.
If the pocket is in a fold, line of primaqiune leaves must take place in strict external bend folds. Another part of the lining pritachivajut to the bottom of the main details. Joint width 1 cm the Lining folded inside out the main parts the seams in the products of cotton fabric, straighten, products silk and woolen fabrics priorivet. The pocket lining to grind with three sides with rounded lines in the corners. The ends of the pockets is fixed double reverse stitching. The seam of the lining and seams of the lining to primaqiunemain part overcast on a special machine. In the products of woolen and silk fabrics, the leaves spread, primetyvajut one stitching in the middle. The ends of the leaves scribbled on the core part on the distance prescribed by the model, or modify manually hidden stitches, placing the back of it for strength rectangular pieces forms of cotton fabric. Pocket ready priorivet with the inside and from the front side through the strip, straightening the edges.

  Treatment pocket without the leaves in the seam. Pocket (Fig. 36, a) is marked in the same way as pocket leaflets in the seam. On the front side of the upper and lower parts of the main part nadechkaapplied part of the lining face down and pritachivajut. Width seam 1 cm Lining pockets turn. Straighten the seams in the articles of wool and silk fabrics priorivet.
Finishing line the top part, if it is designed according to the model, paving with the front side with the foot with the guide at a distance according to the model. Then grind off part of the main part and at the same time the lining. Joint width 1 - 1.5 cm the Ends of the pockets is fixed double reverse stitching. The seam of the lining and seams of primaqiune it to main part overcast on a special machine. Pocket ready (Fig. 36, b) priorivet from the inside and from the front side through the gasket.