Friday, 29.03.2024, 02:37
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » Technology women's and children's light clothing

§ 15. Processing and shoulder sections

 Treatment of the side sections. The side sections of the front can be processed before the processing of clasps or after depending on composed of division of labor in mass production, while the custom - orders- the number of fittings, performed on the figure of the customer. If the product fulfill with onefitting, the side sections can be processed before processing of the clasp or after if with two fittings - the side sections of the grind only after final refinement of the balance of the product, i.e. after the second fitting, the clasp must be fully processed by the second fitting.Or in front of shelves stacked with back right sides inside, stack the slices and smatyvay according to the planned lines, aligning the notch, pokazyvaut back between nasecki and products, not cutting at the waist, with a tight fit on the figure in front of pokazyvaut stretch side pockets. In the mass production of the side sections grind without prior smachivaniya from the front landing details on these areas between nasecki. Joint width 1 - 1,5 cm In the manufacture according to individual orders of the seam width can be increased.
In dresses with flared skirts side skirt and side grind off slices, placing the lines parallel to the cuts to ACCbottom, and the area of bending the bottom line are laid so that after the operation of bending the bottom seams of a grinding match.
In products from cotton fabrics both cut together on overcast a special machine and bent in the direction of the front, and in the products of wool and silk fabrics, the cuts must be processed before grinding, andafter grinding the seams rautureau. Razoruzhenie or autoimune seams make from the inside out without proteinlike with the use of process steam for humidification (the side seams can be resutured or press it, depending on the model).
Angle inclination of the seam allowance in the plane of the parts in the clamped condition should be no more than 5-10'. Depending on model the side seams in the articles of wool and silk fabrics can be press. In this case slices overcast after grinding or the flatlock. 

Fig. 61. Distribution of planting at the shoulder cut of the back 

  Treatment of the shoulder sections. The shoulder sections of the back depending on the model can be processed tuck (tucks processing see Chapter 1, § 4). Shelf or front and back fold, right sides inside, equating sections. In the manufacture of for individual orders the slices metiaut, Posiva the back (Fig. 61),departing 1.5 - 2 cm from the neck, and ends at a distance of 3 - 4 cm from the cut of the armholes make the greatest landing in the middle of this area. When the presence of tuck on the back from the shoulder cut on the last pokazyvaut the smaller value. The value of planting depends mainly on the shapeof the customer. In mass production shoulder seams sew without prior smachivaniya with a landing back on the site provided design. The amount of planting specified in the technical conditions and also depends largely on the product design and structure tissue.
Flatlock perform from the front on the sanding machine stitch two or one line with paving edge or smachiwausa-overlock machine chain stitch one line without stitching the edges. When grinding the shoulder cuts with the edge an edge is placed from the front (shelves) so that one edge edges should coincide with the shoulder cut and the other for its edge by 0.1 - 0.2 cm fall under place.
When connecting the two shoulder sections lines they should be located from one another not more than a distance of 0.1 - 0.2 see the products sleeveless shoulder seams sew one line. The width of the seam sanding the car 1 - 1.5 cm, Width smachiwausa seam-overlock machine can be 0,7 - 0,8 cm
Razoruzhenie or autoimune perform from the inside without proteinlike with the use of process steam for humidification. When manufacturing of products under individual orders and in the absence couple these technological operations are performed in protohellenic with advanced hydration.



Category: Technology women's and children's light clothing | Added by: 18.10.2017
Views: 360 | Rating: 0.0/0

Total comments: 0
avatar