Friday, 29.03.2024, 08:30
Welcome Guest | Sign Up | Log In

All about sewing

Site menu


Section categories
Sew yourself
The ABCs of sewing
Women's clothing
Sewing for little
Designing men's outerwear
Cutting tailoring modeling women's lightweight clothing
Cutting and sewing of women clothes
Technology women's and children's light clothing
Technology of sewing production
Women's and children's dress
A hundred styles of women's dresses
Fashion tops
The basics of the art of designing clothes
Design basics clothing
Modeling and design artwork for women's and children's clothing
The manufacture of men's and children's costumes
Manufacturer of women's and children's outerwear
Art beautiful dress
According to the laws of beauty
The art of sewing
Design women's coat
Design basics outerwear
National clothes
Search
Log In
Site friends
Statistics

Total online: 1
Guests: 1
Users: 0

Home » Articles » Technology women's and children's light clothing

§ 1. Features of processing products with Raglan sleeves casual


Fig. 111. Dress casual Raglan sleeve 

Products sleeve Raglan cut (Fig. 111) never go out of fashion for several decades.
Feature products sleeveless casual Raglan is that the shoulder part of the shelves and back are cut together with sleeves. Raglan sleeves can be one-piece, double seam and less flow. In light clothing, the most common are one-piece sleeves and double seam with the outer and inner seams. Products with sleeves casual reglan is usually made with a low armhole. Parts cut this product shown in Fig. 112. The cut parts have the same names as in product with set-in sleeves.

Treatment tucks, clasps on shelves or front, collar, pockets, backs and other parts with sleeves casual Raglan is no different from manufacture of these components in products with vtachnoy sleeves. Feature is the handling of the sleeves, armholes, front and back, sleeves joint with the arm openings.
After connecting the side sections of the handle openings. Then treated sleeves and connect them with the product and the last turn handle neck or connecting the collar with the neck.
The seam of the armhole of the backrest in the products of wool fabric for storevault obtain a convexity to fit the shoulder blades. The seam of the armhole shelves also storevault for the best fit in the chest area. The magnitude of stivania depending on the shape of the customer and the structure of the tissue.
For the best secure the landing cut arm openings and a distance of 0.5 - 0.7 cm from the edge paving machinery lines, and in products from tissues, easily stretching, it is recommended to lay edge. In the products of silk, cotton fabrics are paving the edge of the base material, and the products of woolen fabrics - cotton type fabric madapolam or calico to the treated region came under the line of vrachevanie the sleeves, and the cut edges under the stitching serging slices seam vrachevanie sleeves.
One-piece sleeve Raglan is definitely the top tuck, which is necessary to obtain the shape of the shoulder part of the product. To obtain the best shape it is recommended that one-piece sleeve be cut out of bias thread. Treatment tucks produce the same as the processing of Darts on the shelves and the back.
In the narrow tubes by an elbow cut it is necessary to provide a tuck, and the front slice products woolen fabrics to pull the slice at the level of the elbow. When smachivanie lower sections of the elbow cut at the site of the elbow and slightly above slightly pokazyvajut. The size of the landing depends on the structure of the fabric. Joint width connection sections 1.2 - 1.5 cm depending on the falling of tissue.
Double seam at sleeves or the sleeves with the outer and inner seams the processing starts with the outer (top) weld. Details fold right sides inside, stack the slices and grind, and when the custom pre-orders smatyvay. Seam rautureau, and then iron on the side depending on the model three steps: first, the shoulder seam area, then from the bottom to the shoulder, and the last phase of the transition from the first segment to the sleeve. In this case ensure that the seam is in the process of wet-heat processingstretched.
If the model nastroni outer seam, the seam sections bent to the side, zametyvayut, priorivet paving and finishing the stitching with a special foot at a distance that depends on the model. The lower sections of the sleeves connect in the same way as in single-joint sleeve. In flow sleeve in which the upper half consists of two parts (front and elbow), the first connecting part of the upper halves as well as the outer sections of double seam of the sleeve. Then connect the front sections the upper and lower halves, and then connect the elbow sections.
In those models where the elbow joint must be covered by line the Assembly sequence of the parts of the sleeve changes. In this case, after piecing together parts of the upper halves of the sleeves and the machining of the outer seam grind elbow sections with the fit of the upper half of the sleeve at the site the elbow and just above. After grinding the seams rautureau, then iron in the upper halves, with the front side zametyvayut side priorivet and scribbled on the front side at a distance stipulated by the model. Thread zamatyvala removed. After thatconnect the front sections of the sleeves. Bottom sleeveless casual reglan treat as well as the casting sleeve.
Matiwane and stitch sleeves the openings produced with the landing sleeve between nadechka, stachivaya on sleeve. Seam width of 1.2 - 1.5 cm.



Category: Technology women's and children's light clothing | Added by: 18.10.2017
Views: 338 | Rating: 0.0/0

Total comments: 0
avatar