One of the main types of women's clothing and clothes for young people are pantsuits (Fig. 100). Short jackets without lining, jackets-shirts, jackets "vests", in peasant blouse style of dress-tunics and trousers - comfortable clothing for training, work and rest.
The shape and fit of the pant suits are different. The jacket can to be single-breasted or double-breasted, loose or attached at the waist (Podkayne), collar of different shape, or without it, with sleeves long, medium or short, set-in, Raglan, or the combined cut. Widespread pant the ensembles in which the upper part of the suit is not resolved as a jacket, and as blouse with front zipper (chest or slightly below) or on the back.
If the pants included in the costume set, then they are made from the same fabric as the jacket. Pants can be manufactured separately without jacket.
Depending on the purpose pant can be sporty, for recreation and tourism and be an integral part of the working costume. Pants model (Fig. 101) is very diverse and depending on purpose and direction of fashion they can be short (shorts), up to knee, over the knee and a long, narrow, straight and extended downward. The bottom pants can be cuffed and uncuffed. The zipper handle front or side seams zipper or serged stitches on buttons.
The top edge of the pants are treated with a stitched belt the facing or grosgrain ribbon. On the belt to maintain the belt can to be loops, the number of which depends on the model.
Work trousers were most often developed pockets. The pockets can be in the seam the front halves and patch on the front and rear halves.
For making casual pantsuits are recommended for a variety of platepie fabric suiting for trousers and various silk fabrics for blouses.
§ 1. Model Trouser suits
Model 1. Pant suits of woolen fabric for girls and slender women (see Fig. 100, top left). Jacket semi-fitted silhouette with a belt single breasted, with a button at the side obraznymi loops for four buttons, with fold-over collar and set-in sleeves. Shelves with reliefs from the armhole to pocket, side Welt pockets, with flap, finished stitching to mimic the shape of the surface pocket, with curly loops for zone of the seam primaqiune valve.
The back is two piece with a seam in the middle, darted from the shoulder seams one on each side.
Casting long sleeves, double seam, with slits in the elbow seams, trimmed with buttons.
Bead, collar, waistband, belt loops and pocket flaps trimmed with stitching on a distance of 0.8 cm from the edge. The pants are straight along the entire length with zipper in the side seams or the front middle seam.
The front halves of trousers with Darts at the waist - one on each half, the rear halves of the pants with Darts at waist - two on each half. The top edge is trimmed with stitching at a distance of 0.8 cm from the edge.
Model 2. Suit cotton denim (see Fig, 100, top third on the left). Jacket of adjoining silhouette with a stitched belt at the waist, with zipper, with a collar and set-in sleeves. Shelves at the top of the straight yoke, notched side seams and from the waist line, with patch pockets fastened with a zipper.
Back at the top with a straight yoke, with reliefs from under the yoke to seam protecive zone.
Long sleeve one-piece bottom with banded cuffs secure the serged loops on the two buttons.
Collar, seams primaqiune coquettes, patch pockets, tuck, reliefs, the edge of the clasp and trim the waist line at a distance of 0.5 cm from region.
Straight trousers, top with wide banded waistband with belt loops, straight front closure with a zipper. The front halves of trousers patch pockets fastened with a zipper. Region invoices pockets decorated with stitching at a distance of 0.5 cm from the edge.
|